Using the menus

To open the menus, press the menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) The Main menu appears. Use the arrow buttons to move up and down to high- light the desired submenu, then press the Select button.

To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio but- tons, or turn the feature on or off using check boxes. Press Select to confirm your changes. Use the arrows to navigate to another setting. When your adjustments are complete, navigate to Previous, then press Select to go to the previous menu; press the Menu button at any time to close the menus.

Dots appear before the menu name. The number of dots indicate the menu’s level, ranging from one (the Main menu) to four (the most nested menus).

The menus are grouped by usage:

•The Picture menu provides image adjustments.

•The Settings menu provides set-up type adjustments that are not changed often.

•The Source Info menu provides a read-only display of information about the projector and source.

Certain menu items may be grayed out until a particular source is con- nected. For example, Tint is only available for video sources and will be hid- den when a computer source is active. Other menu items may be grayed out when they are not available. For example, Brightness is grayed out until an image is active.

Menu button

Main menu	Keypad navigation
	buttons

Dots

Picture	Settings
menu	menu

Source Info menu