Marantz PD5001 manual Menu Operations, Advanced menu mode

Page 19

OSM (On Screen Menu) Controls

Menu Operations

The following describes how to use the menus and the selected items.

1.Press the MENU/ENTER button on the remote control to display the MAIN MENU.

MAIN MENU

PICTURE		SET UP
AUDIO		FUNCTION
IMAGE ADJ .		SIGNAL INFO .
SEL.	MENU/ENTER OK	EXIT EXIT

2.Press the cursor buttons ▲ ▼ on the remote control to highlight the menu you wish to enter.

3.Press the MENU/ENTER button on the remote control to select a sub menu or item.

P I C T U R E

PICTURE MEMORY :			OFF
CONTRAST						: 52
BRIGHTNESS						: 32
SHARPNESS						: 16
SHARPNESS						: 16
COLOR						: 32
TINT		R				G : 32
NR	:		OFF
COLOR TEMP.	:		MIDDLE
CINEMA MODE	:		ON
PICTURE MODE	:		NORMAL

SEL. ADJ.	MENU/ENTER OK EXIT RETURN

4.Adjust the level or change the setting of the selected item by using the cursor buttons on the remote control.

Information

Advanced menu mode

When “ADVANCED OSM” is set to “ON” in the FUNCTION menu, full menu items will be shown.

PICTURE

PICTURE MEMORY	:	OFF
CONTRAST					: 52
BRIGHTNESS					: 32
SHARPNESS					: 16
SHARPNESS					: 16
COLOR					: 32
TINT	R				G : 32
NR	:	OFF
COLOR TEMP.	:	MIDDLE
CINEMA MODE	:	ON
PICTURE MODE	:	NORMAL
GAMMA	:	2.2
LOW TONE	:	MODE1
SET UP LEVEL	:	0%
COLOR TUNE

SEL.

ADJ.

MENU/ENTER OK EXIT RETURN

*The actual screen may be different from the ones in this manual.

CONTRAST

: 10

5.The adjustments or settings are then stored in memory. The change is stored until another change is made.

6.Repeat steps 2 – 5 to adjust an additional item, or press the EXIT button on the remote control to return to the main menu.

*When adjusting using the bar at the bottom of the screen, press the or button within 5 seconds. If not, the current setting is stored and the previous screen appears.

Note: The main menu disappears by pressing the EXIT button.

20

Image 19

Contents Model PD5001 User Guide Additional Safety Information Important Safety InstructionsInformations de Sécurité Supplémentaires AvertissmentImportant Information PrecautionsPrécaution Recommandations importantesAvertissements et précautions de sécurité Operating Environment PD5001 Remarque AvertissementContents Ventilation Requirements for enclosure mounting InstallationOperating Range Using the remote controlBattery Installation and Replacement Cable ManagementFront View Turns the monitor’s power on and offReceives the signals from the remote control Part Names and FunctionPD5001 Rear View/ Terminal BoardRemote Control Basic Operations Wide Operations When viewing videos or digital video discsNormal size screen 43 or Sxga Wide Screen Operation with Computer SignalsWhen wide signals are input Supported resolutionSplit Screen Operations Operations in the Side-by-side modeShowing a couple of pictures on the screen at the same time Zooming in on a specific input Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSM controlsMenu Operations Advanced menu modeMain menu Sub menu Sub menu 3 Sub menu Menu TreeReset Restoring the factory default settingsReducing noise in the picture Picture Settings MenuStoring picture settings Adjusting the picture Adjusting the white balance Setting the color temperatureAdjusting the color to the desired level Setting the picture to suit the movieChanging the Gamma Curve Making the Low Tone adjustmentsAdjusting the pedestal level black level Adjusting the colorsImage Adjust Settings Menu Audio Settings MenuSetting the allocation of the audio and DVD/ HD connectors SET UP Settings Menu Setting the video signal format Setting the black level for Hdmi signalSetting the background color when no signal is being input Etting the screen size for S1/S2 video input Setting the position of the menuTurning on/off the menu display Setting the power management for computer images Function Settings MenuResetting to the default values Setting the menu modeDisplaying still images in the sub screen ON/STANDBY indicatorSetting the Input Skip Displaying the entire image during Digital Zoom operationsReducing image retention When set to Auto Peak Bright settings Orbiter settings OSM Orbiter settings Setting Closed Caption INVERSE/WHITE Settings Soft Focus settingsSetting the power on mode Signal Information MenuReducing the brightness of Closed Caption Pin Assignments External Control1/8 Stereo Mini cable must be purchased separately Connection Example Connecting an STBConnection with STB Connection ExampleSymptom Checks Remedy TroubleshootingSpecifications PD5001 Computer input signals supported by this system Supported resolution PD5001KHz 169 CVT standard compliantIs a registered trademark