Marantz PD4240D Wide Screen Operation with Computer Signals, When Picture Size is set to OFF

Page 21

Wide Screen Operation with Computer Signals

Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen.

1.Press the WIDE button on the remote control.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ NORMAL → FULL → ZOOM

NORMAL size screen (4:3 or SXGA 5:4)

The picture has the same size as the normal computer image.

FULL size screen

The image is expanded in the horizontal direction.

ZOOM size screen

When wide signals are input.

FULL size screen

When “PICTURE SIZE” is set to “OFF”

*This cannot be set in some models. “TRUE size” will not be displayed in such cases.

The screen size switches as follows:

→TRUE → FULL → ZOOM

TRUE size screen (VGA, SVGA 4:3)

The image is true resolution.

FULL size screen

The image is expanded in the horizontal and vertical direction.

ZOOM size screen

When wide signals are input.

TRUE

The image is true resolution.

FULL

Information

Supported resolution

See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor.

“PICTURE SIZE” setting

When the setting of “PICTURE SIZE” is OFF, the size of RGB-input pictures will be TRUE in place of

NORMAL.

When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put

Select an appropriate setting for RGB SELECT mode referring to the“Table of Signals Supported” on page 7 of Model Information.

*“VGA”, “SVGA” and “SXGA” are registered trademarks of IBM, Inc. of the United States.

Note:

Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in.

14

Image 21

Contents Model PD4240D User Guide Contents of the Package Features you’ll enjoy includeIntroduction Introduction to the Plasma MonitorPrecautions Important InformationRisk of Electric Shock Do not Open Plasma monitor cleaning procedure To avoid damage and prolong operating lifeRecommendations to avoid or minimize phosphor burn-in Précautions Recommandations importantesMises en garde et précautions de sécurité Risque D’ELECTROCUTIONMéthode de nettoyage du moniteur à plasma Contents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma MonitorReceives the signals from the remote control Turns the monitor’s power on and offPart Names and Function Front ViewSyncronization signal Connect the included power cord hereRear View/ Terminal Board Connect DVD’s, High Definition or Laser Discs, etc. hereRemote Control Transmits the remote control signals Battery Installation and ReplacementNot functional for the models covered in this manual Clears the number set by the ID Select buttonHandling the remote control Using the wired remote control modeOperating Range Approx 7m/23ftInstallation Digital signal outputPersonal computer with a Connecting Your VCR or Laser Disc Player Connecting Your Document CameraConnecting Your DVD Player Connections with Equipment that have a Digital InterfacePin No Signal Analog Pin Assignments and Signal Levels for 15 pin RGB AnalogCable Management Creating a video wall Basic Operations To cancel the off timer To set the off timerAfter the power is turned off with the off timer To check the remaining timeWide Operations When viewing videos or digital video discsWhen Picture Size is set to OFF Wide Screen Operation with Computer Signals Supported resolution Picture Size settingMenu Operations Advanced menu modeMenu Tree ResetOnly when Auto Picture is OFF RGB/PC only Adjusting the picture Picture Settings MenuSetting the color temperature Adjusting the color to the desired levelReducing noise in the picture Adjusting the white balance Making the Low Tone adjustments Gamma settings LOW Tone settingsAdjusting the colors Audio Settings Menu Color Tune settings Audio settings menuSetting the allocation of the audio connectors Image Adjust Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Setting Audio INPUT1 to VideoSetting the on-screen menu Option1 Settings MenuChecking the signal being transmitted to RGB1 terminal Setting the BNC connectorsSetting a computer image to the correct RGB select screen OSM Orbiter settingsSetting the Input Skip Setting high definition images to the suitable screen size Input Skip settings RGB Select modesOption2 Settings Menu Resetting to the default valuesSetting the power management for computer images Setting the picture to suit the movie POWER/STANDBY indicatorPLE settings Reducing burn-in of the screenOrbiter settings Orbiter Function settingsInverse Settings Setting the time To select on for the Working TimeScreen Wiper Soft Focus settings Setting the screen size for S1/S2 video inputSetting the gray level for the sides of the screen Gray Level settingsSetting the signal and black level for DVI signal Setting the picture size for RGB input signalsS1/S2 settings PLUG/PLAY settingsUsing the timer Option3 Settings MenuPresent Time settings Present TimeTo reset the program Setting the power on modeTo reset the data Special characters in the Program Timer screenPWR. on Mode settings Enabling/disabling remote control wireless transmissionControl Lock settings IR Remote settingsID number setting Loop Out settingDivider settings Video Wall settingVideo Wall Position settings ScreensAuto ID settings DISP. Mode settingsImage Adjust settings On Delay settings On Delay Power on delayPLE Link settings PLE LinkSetting the menu mode Advanced OSM Settings MenuRepeat Timer Repeat Timer settingsColor System Settings Menu Language Settings MenuSetting the language for the menus Setting the video signal formatApplication External ControlConnections Communication ParametersSymptom Checks Remedy TroubleshootingPage Page Model PD4240D Information Important Safety Instructions PD4240D Précautions Importantes DE Sécurité PD4240D DVI cable not supplied Band Avertissement DOC avis de conformationRemarque Specifications RGBDVD/HD/DTV Supported resolution Table of Signals SupportedComputer input signals supported by this system Full DVIDeclaration of Conformity Japan Is a registered trademark