Video Wall setting
Use this feature to configure a 2⋅ 2 or 3⋅ 3 video wall.
Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.
1.On the MAIN MENU, select “OPTION3”, then press the MENU/ENTER button.
The “OPTION3” screen appears.
2.Use the ▲ and ▼ buttons to select “VIDEO WALL”, then press the MENU/ENTER button.
The “VIDEO WALL” screen appears.
|
|
|
| VIDEO WALL |
|
|
| DIVIDER |
| : | 1 |
| |
|
|
|
|
|
| |
POSITION |
|
|
| |||
DISP. MODE | : | SPLIT | ||||
AUTO ID | : | OFF | ||||
IMAGE ADJUST |
|
|
| |||
P. ON DELAY | : | OFF | ||||
PLE LINK | : | OFF | ||||
REPEAT TIMER | : | OFF | ||||
|
| SEL. | ADJ. | EXIT | RETURN | |
3.Set the VIDEO WALL using ▲▼ ◀ and ▶ buttons. See page 36 to set DIVIDER.
See page 36 to set POSITION. See page 37 to set DISP. MODE. See page 37 to set AUTO ID.
See page 37 to set IMAGE ADJUST. See page 38 to set P. ON DELAY. See page 38 to set PLE LINK.
See page 39 to set REPEAT TIMER.
4.Once the setting is completed...
Press the EXIT button to return to the OPTION3 menu.
Note: A contingency method of shutting off the electric power should be used in cases of emergency during video wall setup.
Information
⬛Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
DIVIDER
Set the 2⋅ 2 or 3⋅ 3 video wall.
Example: Setting “4”
Perform Steps 1-2 of VIDEO WALL, then...
3.Use the ▲ and ▼ buttons to select “DIVIDER”.
4.Use the ◀ and ▶ buttons to select “4”.
The mode switches as follows each time the ◀ or ▶ button is pressed:
→ OFF ↔ 1 ↔ 4 ↔ 9 ←
Information
⬛DIVIDER settings
OFF, 1 ....... 1 Screen (Matrix display function does not
work)
4................ 4 Screens (2⋅ 2 video wall)
9................ 9 Screens (3⋅ 3 video wall)
*When you select “4” or “9”, set the VIDEO WALL POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting “4”
Perform Steps
3.Use the ▲ and ▼ buttons to select “POSITION”, then press the MENU/ENTER button.
The “VIDEO WALL POSITION” screen appears.
4.Use the ◀ and ▶ buttons to select “NO. 4”.
The mode switches as follows each time the ◀ or ▶ button is pressed:
• 4 Screens
→ NO. 1 ↔ NO. 2 ↔ NO. 3 ↔ NO. 4 ←
• 9 Screens
→ NO. 7 ↔ NO. 8 ↔ ....... ↔ NO. 14 ↔ NO. 15 ←
VIDEO WALL POSITION
POSITION NO. 
4 
ADJ. | EXIT | RETURN |
Information
⬛VIDEO WALL POSITION settings
1Screen ..... There is no need to set POSITION.
4 Screens |
|
|
|
|
| |
| NO. 1 |
|
| NO. 2 | ||
|
|
|
| |||
|
|
|
|
|
| |
|
| NO. 4 |
|
| NO. 3 | |
|
|
|
|
|
| |
9 Screens |
|
|
|
| ||
NO. 7 | NO. 8 | NO. 9 | ||||
|
| |||||
|
|
|
|
| ||
|
| NO. 10 | NO. 11 | NO. 12 | ||
|
|
|
|
| ||
|
| NO. 13 | NO. 14 | NO. 15 | ||
|
|
|
|
|
| |
DIVIDER
VIDEO WALL
: 
4 
POSITION |
|
|
|
|
DISP. MODE |
| : | SPLIT | |
AUTO ID |
| : | OFF | |
IMAGE ADJUST |
|
|
|
|
P. ON DELAY |
| : | OFF | |
PLE LINK |
| : | OFF | |
REPEAT TIMER |
| : | OFF | |
SEL. | ADJ. |
| EXIT | RETURN |
|
|
|
| 36 |