ENGLISH
OPERATING INSTRUCTIONS (continued)
Press the TV button to display "TV" in the LCD. The remote controller is functional only when "TV" is displayed in the LCD. If "TV" is not displayed in the LCD, press the TV button.
Input Selection
●Turn the remote controller jog dial to choose an input signal (VIDEO1, VIDEO2, RGB1, or RGB2) and press the ENT button. Turn the remote controller jog dial to choose INPUT and press the ENT button, or press the main unit RGB/VIDEO button to switch through VIDEO1, VIDEO2, RGB1, and RGB2 in this order.
■When the same signal is input to RGB1 and RGB2, the phase may in some cases shift slightly but this is not a malfunction. In such case, readjust the PHASE of the one being used.
Remote | VIDEO1 | (composite or S input) |
controller | ||
TV | VIDEO2 | (COMPONENT input) |
| ||
VID- I |
|
|
1 | RGB1 |
|
| RGB2 | (BNC input) |
ENT | ENT |
|
Main unit |
|
|
RGB/VIDEO |
|
|
Volume Adjustment
●While the
volume.
■The adjustment status will be displayed as guidance while you press these buttons.
●While the guidance is on display, press ▲ to turn up the volume.
●While the guidance is on display, press ▼ to turn down the volume.
■You can also adjust the sound volume setting via the
■The sound volume adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)
R e m o t e
c o n t r o l l e r
V O L
M a i n u n i t
VOLUME 
Sound volume setting
VOLUME : 30
Adjustment status guidance
10