OPERATING INSTRUCTIONS
Turning Power On and Off
●To turn on the main unit power supply, main unit the MAIN POWER switch ( 
) of the main unit to ON and then press the SUB POWER button or the POWER ON or POWER SOURCE
ON/OFF button of the remote controller.
●To turn off the main unit power supply, press the SUB POWER button of the main unit or the POWER OFF or POWER SOURCE ON/OFF button of the remote controller, then main unit the MAIN POWER switch ( 
) to OFF.
■For normal operations, leave the MAIN POWER switch (
) main unit to ON and use the SUB POWER button or the POWER ON or POWER SOURCE ON/OFF button of the remote controller to turn the power on and off.
Indicating lamp | Power status | Operating |
| ||||||
|
|
|
|
|
|
|
|
|
|
Off | Off | When the MAIN POWER switch |
|
|
| is | |||
|
| ||||||||
set to OFF. |
| ||||||||
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
| When the MAIN POWER switch |
|
| is | ||||
|
|
| |||||||
|
| set to ON and POWER OFF or |
| ||||||
Lights red | Off | POWER SOURCE ON/OFF button of | |||||||
the remote controller or the SUB |
| ||||||||
(standby) |
| ||||||||
| POWER button on the main unit |
| |||||||
|
|
| |||||||
|
| located at the front part of the bottom | |||||||
|
| plate is off. |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
| When the MAIN POWER switch |
|
|
|
|
|
| is |
|
|
|
| ||||||
|
| set to ON and POWER ON or POWER | |||||||
Lights or blinks | On | SOURCE ON/OFF button of the |
| ||||||
green | remote controller or the sub power |
| |||||||
|
| ||||||||
|
| button on the main unit located at the | |||||||
|
| front part of the bottom plate is on. |
| ||||||
|
|
|
|
|
|
|
|
|
|
ENGLISH
When the indicating lamp blinks in green or the message “POWER SAVE” or “OUT OF FREQUENCY” appears on the screen, there is something unusual about the status of reception. See “Symptoms That Seemingly Appear to be Failures.” 22
Main power |
switch |
SOURCE
ON ON/OFF OFF
Main unit | Remote |
| controller |
■Avoid repeatedly turning the monitor on and off at short time intervals.
●Failures might result from such operation.
■Turn off the main power switch (
) before leaving the monitor out of
TIPS | use for an extended period of time. |
■If a power failure occurs while the main unit is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the main unit.
9