Marantz PMD690 manual Capacity of Files and Card, Operation, Care of PC Cards

Page 10

ENGLISH

 

SETTING UP

 

Operation

 

 

Capacity of Files and Card

1

Make sure the power is off.

 

2

Insert the PC Card to be formatted.

Due to limitations in the MS-DOS compatable file

3

Slide the POWER switch to the right while

structure system, the maximum size of all the recorded

 

holding down the ERASE (FORMAT) button.

tracks on a card is 1,200MB (MegaBytes) or 1.2GB

4

The format message below will be displayed.

(GigaBytes).

 

The maximum card size that can be read by the PMD690 is 2,150MB (MegaBytes) or 2.15GB (GigaBytes). Cards larger than 2.15GB may not work correctly in the PMD690.

5After formatting the card and generating the EDL file, the "done" message below is displayed for 3 seconds.

6The unit then enters the stop mode

Notes

•Even if a PC Card was formatted in a Windows compatible PC, formatting by the PMD690 is neccessary.

•After recording and erasing a card many times, it is recommended to format the card so that new recording can be stored in the optimum way.

•Do not eject the PC Card or turn this unit’s power off while formatting is in progress.

7When a card is in the PMD690 that has been correctly formatted or had all the tracks erased, the blank card message below will be displayed in the stop mode.

The blank card message indicates that the card contains no audio tracks and is ready to be recorded onto.

Note

•The DISPLAY button can be used to check the amount of recording time available on the card based on the selected REC MODE.

Care of PC Cards

Please refer to the documentation included with your PC card for proper care.

6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents
Portable PC Card Recorder Risk of Electric Shock Do not Open Safety Instructions NEC National Electrical Code Features Introduction How to Use this Manual ContentsAC Adaptor Ni-Cad Rechargeable Battery optionalAC Adaptor and Batteries Alkaline BatteriesPower On Power On/OffSetting the Date and Time Power OffInserting a Card Understanding PC CardsEjecting a Card Formatting a PC CardOperation Capacity of Files and CardCare of PC Cards Powering the microphones Connecting MicrophonesConnecting Analog Components To output analog audio signals to another audio componentHeadphones Connecting Digital ComponentsRemote Control Other ConnectionsPreset Operation Preset ItemsRecording Time PCM Stereo PC ID Number Setting Operation ID Number PresetsExample Display Selections Low Battery Warning and Auto Power OffDuring Stop Mode Changing the Displayed InformationDuring Playback and Play-Pause Display BacklightKey Button Lock During Recording and Record-PauseInput Controls Record Settings Dual Level MonoRec Cancel Basic ProcedureRecording Operation Full Cards Source MonitorMaximum Number of Tracks Reverse and Forward Search PlaybackStarting Playback from a Selected Track Fast Reverse and Forward SearchRepeat Play, Single Track Play Auto Power OffTrack Editing Output SelectionTrack Erase RenumberEDL Marking Searching for EDL Marks Auto MarkChanging a Mark Type Editing EDL MarksErasing an EDL Mark EDL Playback Erasing all the EDL MarksEDL Repeat Playback EDL Playback and EDL Repeat Playback DisplayFile Structure Error MessagesFile Format Troubleshooting Care and MaintenanceDigital audio system SpecificationsInputs OutputsTop Panel Index of Parts, Controls, and DisplayFront Panel Top Panel Front Panel 6JUMP to MARK, EDL PLAY, Total MarkLeft Panel Right PanelREC DisplayIs a registered trademark
Top Page Image Contents