THE EDL
Erasing all the EDL Marks
ERASE
JUMP TO MARK
ENGLISH
From the STOP mode, hold the JUMP TO MARK button and press the ERASE button so that the display flashes the "EdL Erase" message. Continue to hold the JUMP TO MARK button and press the ERASE button again to confirm the EDL Erase function (or press the STOP button to cancel). When the erase operation is complete, the "done" message will be displayed.
The complete procedure is displayed as follows.
5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
|
|
|
|
|
|
| ||
5 |
|
|
|
|
|
|
| 5 |
5 | 5 | 5 |
|
|
| 5 | 5 | 5 |
5 | 5 | 5 |
| |||||
|
| |||||||
|
|
| ||||||
|
|
|
|
Waiting for confirmation. Press the ERASE button while holding down the JUMP TO MARK button to confirm. Press the STOP button to cancel.
EDL Erase operation executing.
EDL Erase complete.
EDL Playback
The EDL playback mode will start playing back from the current position but will observe the direction of the programmed EDL marks.
EDL PLAY
PLAY / PAUSE
(6)
To start EDL playback, hold the EDL PLAY button and press the PLAY/PAUSE button. EDL playback will then start playing the audio on the card starting from the first track (unless it is skipped). An example of a programmed EDL playback is as follows.
Current Position
JUMPJUMP
Recorded Contents
SKIP |
| PLAY |
| SKIP |
| SKIP |
| PLAY |
|
|
|
|
|
|
|
|
|
Play Back Part of Recorded Contents
Skipped Part of Recorded Contents
EDL playback can be paused at any time by pressing the PLAY/PAUSE button. Playback is resumed by again pressing the PLAY/PAUSE button.
To exit from EDL playback, hold the EDL playback and press the PLAY/PAUSE button during EDL playback or EDL play pause. The PMD690 will returns to the normal playback mode, and starts playback from current position.
EDL playback can be stopped at any time by pressing the STOP button. The PMD690 will return to the normal stop mode after EDL playback is stopped.
Notes
•If a Skip ("S") mark is the last mark on a card, then the audio after the mark until the end of the card is skipped.
•Searching and track selection via the 1˜4 and ¢˜¡ buttons is not available during EDL playback.
•If EDL playback is started but there are no EDL marks on the card, the following message will be displayed:
24