Grundig CP-731i user manual Operations, Basic Operation Description

OPERATIONS (continued)

Basic Operation

The Basic operations shown in Table 2 can be controlled from the projector control panel or the supplied remote control transmitter. (items indicated by * may be used from the control panel) NOTE: Use the remote control transmitter at a distance of approximately 3m from the sensor on the

front of the projector, and within a range of 30° left-right. Strong light and obstacles will interfere with operation of the remote control transmitter.

Table 2 . Basic Operation

Item		Description
	Changes in input signal in sequence: Press INPUT		button.*
	RGB1 → RGB2 → VIDEO → S-VIDEO (→ RGB1)
INPUT	Select RGB input: Press RGB button.
	VIDEO/S-VIDEO → RGB1/RGB2	RGB2 ↔ RGB1
SELECT	Select VIDEO/S-VIDEO input: Press VIDEO button.
	RGB1/RGB2 → VIDEO/S-VIDEO	S-VIDEO ↔ VIDEO
	• The selected signal name is displayed for approximately three seconds
	when the input signal is changed.
	Set/Clear position adjustment mode: Press POSITION button.
	The [ ] icon is displayed in the POSITION mode.
	Image position adjustment: Press the , , and		buttons in the
POSITION	position adjustment mode.
	• Valid only in the MAGNIFY mode with VIDEO/S-VIDEO input.

•The [] icon is extinguished, and the position adjustment mode cleared automatically, after approximately ten seconds of inactivity.

,, and buttons may operate as the mouse control button. Refer to P.4.

	Initialize menu items: Select an item and press the RESET		button.
RESET *	Initialize position adjustment: Press the RESET	button
	and the POSITION mode.Valid only when RGB signal is input.

•Valid except for VOLUME, LANGUAGE and H PHASE.

•RESET button may operate as the mouse control button. Refer to P.4.

	Set MAGNIFY mode: Press the MAGNIFY		button.
	Move magnified area: Run Position Adjustment in MAGNIFY mode.
MAGNIFY	Adjust magnification: Press MAGNIFY /			in MAGNIFY mode.
	Clear MAGNIFY mode: Press MAGNIFY OFF￿	button.

•MAGNIFY is cleared by running or setting AUTO, ASPECT, INPUT SELECT or VIDEO, or by changing the input signal.

	Set/Clear FREEZE mode: Press FREEZE button.
	The [II] icon is displayed, and the image frozen, in the FREEZE mode.
FREEZE	• FREEZE is cleared by running or setting POSITION, VOLUME, MUTE,
	Auto Adjust, BLANK ON/OFF, or MENU ON/OFF, or by changing the
	input signal.
	• Do not forget to clear frozen static images.

ENGLISH-10