Grundig CP-731i user manual Setup Menu

OPERATIONS (continued)

Setup Menu

The following adjustments and settings are possible when SETUP is selected at the top of the menu. Part of the Setup menu differs between RGB input and VIDEO/S-VIDEO

input. Select an item with the and buttons, and start operation. Use the Single menu to reduce menu size (see Table 2 MENU SELECT on page 11).

SETUP	INPUT	IMAGE	OPT.
BRIGHT			0
CONTRAST			-2
V POSIT		100
H POSIT		100
H PHASE			+1
H SIZE		800
COLOR BAL R			0
COLOR BAL B			0
ASPECT
	RGB

SETUP INPUT	IMAGE	OPT.
BRIGHT		0
CONTRAST		+1
SHARPNESS		+1
COLOR		0
TINT		0
COLOR BAL R		0
COLOR BAL B		0
ASPECT
VIDEO/S-VIDEO

Table 3. Setup Menu

Item					Description				RGB	VIDEO
										S-VIDEO
BRIGHT	Adjustment: Dark				↔ Light				✔	✔
CONTRAST	Adjustment: Weak				↔ Strong				✔	✔
V POSIT	Adjustment: Down				↔ Up				✔	-
H POSIT	Adjustment: Left				↔ Right				✔	-
H PHASE	Adjustment: Left				↔ Right				✔	-
	• Adjust to eliminate flicker.
	Adjustment: Small				↔ Large
H SIZE	• The image may not be displayed correctly if the horizontal								✔	-
	size is excessive. In such cases, press the RESET
	button, and initialize the horizontal size.
SHARPNESS	Adjustment: Soft				↔ Clear				-	✔
COLOR	Adjustment: Light				↔ Dark				-	✔
TINT	Adjustment: Red				↔ Green				-	✔
	• Valid only when NTSC or NTSC 4.43 signal is received.
COLOR BAL R	Adjustment: Light				↔ Dark				✔	✔
COLOR BAL B	Adjustment: Light				↔ Dark				✔	✔
	Select image aspect ratio:
	4:3[	]	↔	16:9[		]
	Select position of 16:9:[					] image:			✔	-
	Press		button while 16:9[				] is selected.
	Center →		Down →			Up ( → Center		)
ASPECT	Select image aspect ratio:
	4:3[	]	↔	16:9[		]	↔ 4:3 small[ ]
	Select position of 16:9:[					]/4:3 small[		] image:	-	✔
	Press		button while 16:9[				]/4:3 small[	] is selected.
	Center →		Down →			Up ( → Center		)
	• 4:3 small may not be displayed correctly with some input signals.

ENGLISH-12