High End Systems DL1 user manual Connecting Video, Installing a Line Cord Cap U.K. Only

Page 22

Warning: Class 1 equipment - This equipment must be earthed.

Installing a Line Cord Cap - U.K. Only

In the United Kingdom, the colours of the cores in the mains lead of this equipment may not correspond with the colored markings identifying the terminals in the fixture’s plug. Therefore, install a line cord cap in accordance with the following code:

•The core which is coloured green and yellow must be connected to the plug terminal which is marked with the letter “E,” or by the earth symbol , or coloured green, or green and yellow.

•The core which is coloured blue must be connected to the terminal which is marked with the letter “N” or coloured black.

•The core which is coloured brown must be connected to the terminal which is marked with the letter “L” or coloured red.

Warning:Class 1 equipment - This equipment must be earthed.

Vatic Fitter Heads Information - Danmark

Advarsel: Beskyttelse mod elektrisk chock.

Vigtigt!

Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket eller

Connecting Video

The DL.1 fixture has three sets of video connectors on its rear panel, as shown in Figure 2-1.

100-120V; 50-60Hz; 6.8A

200-240V; 50-60Hz; 3.4A

S-Video VGA

RGBHV

Figure 2-1 Video Connectors

2-2 Setup and Configuration

DL.1 User Manual

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Contacting High End Systems US and the AmericasDeclaration of Conformity Product Modification Warning FCC InformationImportant Safety Information SymbolsWarranty Information PatentsVii What You Should Know About Copyright Table of Contents Chapter Fixture Operation DMX Programming Chapter General Maintenance and Troubleshooting DL.1 Fixture Dimensions List of FiguresXiv Features OperationOptional Accessories Optional Digital Eye TechnologySpecifications Physical SpecificationsProjector Specifications Electrical SpecificationsEnvironmental Specifications Video Connectors Cable and Connector SpecificationsDMX and RS-485 Projector Link Features and Specifications Replacing the Power Cord Cap Unpacking the FixtureInstalling a Line Cord Cap U.K. Only Connecting VideoVatic Fitter Heads Information Danmark Input Source Recommended Mounting Orientation Mounting the FixtureFog Machine Warning Verifying the Truss Support Mounting the Fixture UprightTruss Mounting ClampsMounting Procedure Attaching the Mounting bracketsLinking the Fixtures Data Cabling and ConnectorsCable Connectors DMX Data CablesSetting up the Link XLR 5-pin connectorInstalling a Terminator Powering On the FixtureHoming the Fixture Verifying and Uploading Fixture Software Viewing the Display PanelSetting the DMX Start Channel DL.1 menu system navigation buttonsShutting Down the Fixture Locking Pan and Tilt PositionsTalkBack Support for Remote Access Chapter Fixture OperationMenu Display Navigational BasicsUnlocking the Menu System Display in Menu Locked ModeExiting the Menu System Menu Map Description/NotesHome Fixture ALL Menu Option Descriptions Setting a DMX Start ChannelFactory Default Settings DMX Address MenuPan Invert Pan/Tilt SwapTilt Invert Display Level Data Loss TimeoutProjector Input Source Projector Default? Reset Projector HoursProjector In By DMX? Striking the Projector LampIris Version Focus Override Menu Zoom Override MenuProjector Control Camera Option Align Pan Motors New Air FilterFixture Mode Menu Crossloading Fixture SoftwareTest Options Menu Copying the Boot CodeHoming the Fixture Self Test Menu Information MenuUnique Number Temperatures Menu DMX Values MenuFixture Hours Fixture Hours ResetProjector Hours Reset Lamp HoursDisplay Errors To Display ErrorsFixture Operation Lighting Consoles DMX Programming OverviewBit vs -bit DMX Fixture LibrariesDMX Output Displays Bit DMXParameter Descriptions Standard Movement and Projection ControlsControl Function Options Changing Projector Source Input Digital Eye Technology Control DL.1 Protocol Tables Standard DL.1 ProtocolDefault Enhanced DL.1 ProtocolChapter General Maintenance Troubleshooting Maintaining the Filtering SystemReplacing Parts Replacing FiltersReplacing the Lamp Reassemble the fixtureReplacing the Fuse Replacing the FuseCleaning or Replacing the Front Window Cleaning or Replacing the Front WindowDriver board configurations Replacing a Driver BoardReplacing 2-Phase Board Replacing 3-Phase BoardGeneral Troubleshooting LED StatesSteady Orange Receiving information from 2 & 3 phase Boards Addressing screw and LED locations General Troubleshooting Suggestions Problem SolutionGeneral Maintenance and Troubleshooting Appendix a Safety Information Marron phase Bleu neutre Vert/jaune terre Appendice a Importantes Informations Sur La SécuritéWarnung Zum Schutz Vor Brandgefahr Anhang a Wichtige Hinweise Für Ihre SicherheitWarnung Zum Schutz Gegen Gefährliche Körperströme Apéndice a Información Importante De Seguridad Advertencia Para Protección Continua Contra IncendiosAvvertenza Per Prevenire Incendi Appendice a Importanti Informazioni Di SicurezzaVigtig Sikkerhedsinformation Avvertenza Per Prevenire Le Scosse ElettricheSafety Information Appendix B MSpeed Conversion Table Time Dec Hex MSpeed Conversion Table

DL1 specifications

The High End Systems DL1 is a cutting-edge digital light fixture designed for dynamic and engaging lighting applications in the entertainment industry. Known for its versatility, high performance, and user-friendly interface, the DL1 has become a staple in various venues, including theaters, concert halls, and corporate events.

One of the standout features of the DL1 is its advanced digital projection technology. This fixture combines powerful imaging capabilities with high-quality optical components, allowing users to project vibrant images, videos, and animations onto various surfaces. The DL1 boasts a high-resolution output and color fidelity, ensuring that visuals are displayed with stunning clarity and richness. This makes it an excellent choice for productions requiring intricate image presentations.

In terms of flexibility, the DL1 offers an impressive range of features tailored for live events. It comes equipped with a highly configurable lens system that allows users to alter the beam angle, focusing on the fine details or casting a wider light for broader coverage. This adaptability is coupled with a robust gobo system, enabling designers to create dynamic patterns and shapes that can enhance any performance setting.

The DL1 integrates seamlessly into existing lighting rigs, thanks to its compatibility with industry-standard control protocols, such as DMX and Art-Net. This allows for precise control and integration with other lighting fixtures, providing designers and operators with extensive creative possibilities. Its on-board programming features also empower designers to set up shows quickly and efficiently, reducing time spent on setup and increasing the focus on artistic direction.

In terms of construction and durability, the DL1 is built to withstand the rigors of tour and rental environments. Its rugged yet lightweight design ensures reliability, while the efficient cooling system prolongs the lifespan of its internal components. This durability is essential for maintaining peak performance during demanding shows and events.

Lastly, the High End Systems DL1 emphasizes ease of use. With an intuitive user interface and robust onboard capabilities, operators can quickly navigate settings and access features, making it ideal for both novice and experienced lighting designers. The combination of its innovative technology, flexible features, and ease of use firmly establishes the DL1 as an essential tool for any modern lighting designer looking to enhance their productions with high-impact visuals.
Top Page Image Contents