High End Systems DL1 Verifying and Uploading Fixture Software, Viewing the Display Panel

Page 30

Viewing the Display Panel

The DL.1 display panel gives access to the fixture’s onboard menu system. “The DL.1 fixture’s on-board menu system allows the user to:” on page 3-1describes the menu system in detail.

Verifying and Uploading Fixture Software

Check the display in the Menu Locked mode to identify the Software version loaded on the fixture. Verify that the version displayed by the fixture is the latest available. The latest software for DL.1 fixtures is available in the support section of the High End Systems web site (www.highend.com). If a software upgrade is required, there are three ways to upload new software to DL.1 fixtures:

1.Attach a High End Systems Upload Dongle to the computer and upload the software to the DL.1 fixture.

A High End Systems Upload Dongle requires a 386-based (or faster) computer, MS DOS® version 3.3 (or later) or Windows 95/98/ME, and one MB of free disk space. To obtain an Upload Dongle (with installation and operation instructions), contact your High End Systems dealer/distributor (see “Contacting High End Systems®” on page ii).

2.Crossload software from one fixture that contains the new software to all other DL.1 fixtures on the link.

3.Upload the new software to all DL.1 fixtures on the link using a HandShake™ handheld controller from High End Systems.

Note: Before uploading new software, disconnect any controllers, bypass any serial data distributors and/or data line optoisolators, and bypass or make sure that any fixtures using RS-422 communications (such as Dataflash® AF1000 xenon strobes, and Intellabeam® fixtures) are located after all the DL.1 fixtures on the link. These devices will block communication with any other DL.1 fixtures on the link

 

 

 

2-10 Setup and Configuration

DL.1 User Manual

Image 30
Contents Page Contacting High End Systems US and the AmericasDeclaration of Conformity Product Modification Warning FCC InformationImportant Safety Information SymbolsWarranty Information PatentsVii What You Should Know About Copyright Table of Contents Chapter Fixture Operation DMX Programming Chapter General Maintenance and Troubleshooting DL.1 Fixture Dimensions List of FiguresXiv Features OperationOptional Accessories Optional Digital Eye TechnologySpecifications Physical SpecificationsElectrical Specifications Projector SpecificationsEnvironmental Specifications Cable and Connector Specifications Video ConnectorsDMX and RS-485 Projector Link Features and Specifications Replacing the Power Cord Cap Unpacking the FixtureConnecting Video Installing a Line Cord Cap U.K. OnlyVatic Fitter Heads Information Danmark Input Source Mounting the Fixture Recommended Mounting OrientationFog Machine Warning Verifying the Truss Support Mounting the Fixture UprightTruss Mounting ClampsMounting Procedure Attaching the Mounting bracketsLinking the Fixtures Data Cabling and ConnectorsCable Connectors DMX Data CablesSetting up the Link XLR 5-pin connectorPowering On the Fixture Installing a TerminatorHoming the Fixture Verifying and Uploading Fixture Software Viewing the Display PanelSetting the DMX Start Channel DL.1 menu system navigation buttonsShutting Down the Fixture Locking Pan and Tilt PositionsTalkBack Support for Remote Access Chapter Fixture OperationMenu Display Navigational BasicsDisplay in Menu Locked Mode Unlocking the Menu SystemExiting the Menu System Menu Map Description/NotesHome Fixture ALL Menu Option Descriptions Setting a DMX Start ChannelFactory Default Settings DMX Address MenuPan/Tilt Swap Pan InvertTilt Invert Data Loss Timeout Display LevelProjector Input Source Projector Default? Reset Projector HoursStriking the Projector Lamp Projector In By DMX?Iris Version Zoom Override Menu Focus Override MenuProjector Control Camera Option Align Pan Motors New Air FilterFixture Mode Menu Crossloading Fixture SoftwareCopying the Boot Code Test Options MenuHoming the Fixture Information Menu Self Test MenuUnique Number Temperatures Menu DMX Values MenuFixture Hours Fixture Hours ResetProjector Hours Reset Lamp HoursDisplay Errors To Display ErrorsFixture Operation Lighting Consoles DMX Programming OverviewBit vs -bit DMX Fixture LibrariesDMX Output Displays Bit DMXParameter Descriptions Standard Movement and Projection ControlsControl Function Options Changing Projector Source Input Digital Eye Technology Control DL.1 Protocol Tables Standard DL.1 ProtocolDefault Enhanced DL.1 ProtocolChapter General Maintenance Troubleshooting Maintaining the Filtering SystemReplacing Parts Replacing FiltersReplacing the Lamp Reassemble the fixtureReplacing the Fuse Replacing the FuseCleaning or Replacing the Front Window Cleaning or Replacing the Front WindowDriver board configurations Replacing a Driver BoardReplacing 2-Phase Board Replacing 3-Phase BoardGeneral Troubleshooting LED StatesSteady Orange Receiving information from 2 & 3 phase Boards Addressing screw and LED locations General Troubleshooting Suggestions Problem SolutionGeneral Maintenance and Troubleshooting Appendix a Safety Information Marron phase Bleu neutre Vert/jaune terre Appendice a Importantes Informations Sur La SécuritéAnhang a Wichtige Hinweise Für Ihre Sicherheit Warnung Zum Schutz Vor BrandgefahrWarnung Zum Schutz Gegen Gefährliche Körperströme Apéndice a Información Importante De Seguridad Advertencia Para Protección Continua Contra IncendiosAvvertenza Per Prevenire Incendi Appendice a Importanti Informazioni Di SicurezzaVigtig Sikkerhedsinformation Avvertenza Per Prevenire Le Scosse ElettricheSafety Information Appendix B MSpeed Conversion Table Time Dec Hex MSpeed Conversion Table

DL1 specifications

The High End Systems DL1 is a cutting-edge digital light fixture designed for dynamic and engaging lighting applications in the entertainment industry. Known for its versatility, high performance, and user-friendly interface, the DL1 has become a staple in various venues, including theaters, concert halls, and corporate events.

One of the standout features of the DL1 is its advanced digital projection technology. This fixture combines powerful imaging capabilities with high-quality optical components, allowing users to project vibrant images, videos, and animations onto various surfaces. The DL1 boasts a high-resolution output and color fidelity, ensuring that visuals are displayed with stunning clarity and richness. This makes it an excellent choice for productions requiring intricate image presentations.

In terms of flexibility, the DL1 offers an impressive range of features tailored for live events. It comes equipped with a highly configurable lens system that allows users to alter the beam angle, focusing on the fine details or casting a wider light for broader coverage. This adaptability is coupled with a robust gobo system, enabling designers to create dynamic patterns and shapes that can enhance any performance setting.

The DL1 integrates seamlessly into existing lighting rigs, thanks to its compatibility with industry-standard control protocols, such as DMX and Art-Net. This allows for precise control and integration with other lighting fixtures, providing designers and operators with extensive creative possibilities. Its on-board programming features also empower designers to set up shows quickly and efficiently, reducing time spent on setup and increasing the focus on artistic direction.

In terms of construction and durability, the DL1 is built to withstand the rigors of tour and rental environments. Its rugged yet lightweight design ensures reliability, while the efficient cooling system prolongs the lifespan of its internal components. This durability is essential for maintaining peak performance during demanding shows and events.

Lastly, the High End Systems DL1 emphasizes ease of use. With an intuitive user interface and robust onboard capabilities, operators can quickly navigate settings and access features, making it ideal for both novice and experienced lighting designers. The combination of its innovative technology, flexible features, and ease of use firmly establishes the DL1 as an essential tool for any modern lighting designer looking to enhance their productions with high-impact visuals.