High End Systems DL1 user manual Pan/Tilt Swap, Pan Invert, Tilt Invert

Page 39

4.To reinstate the factory defaults if OFF is displayed, use the up and down arrows on the Navigation button to scroll to ON and press the Enter button to select.

Pan/Tilt Swap

This option swaps the pan motor and tilt motor operation.

To swap Pan and Tilt:

1.Press the Menu button to unlock the menu system or to move back up the system to the top level menus.

2.Using the left and right arrows on the Navigation button, scroll through the top level to SET PARAMETERS MENU and press the Enter button to select.

3.Using the left and right arrows on the Navigation button, scroll to PAN/TILT SWAP. The current state (ENABLED or DISABLED) will be displayed.

4.Use the up and down arrows on the Navigation button to scroll to ENABLED to swap pan and tilt or DISABLED to revert fixture to default setting and press the Enter button to select.

Pan Invert

This menu option inverts the direction of the pan motor to coordinate movements of fixtures in opposite directions.

To invert the fixture’s Pan motion:

1.Press the Menu button to unlock the menu system or to move back up the system to the top level menus.

2.Using the left and right arrows on the Navigation button, scroll through the top level to SET PARAMETERS MENU and press the Enter button to select.

3.Using the left and right arrows on the Navigation button, scroll to PAN INVERT. The current state (ENABLED or DISABLED) will be displayed.

4.Use the up and down arrows on the Navigation button to scroll to ENABLED to invert Pan movement or DISABLED to revert fixture to default setting and press the Enter button to select.

Tilt Invert

This menu option inverts the direction of the tilt motor to coordinate movements between fixtures on a link facing each other vertically.

To invert the fixture’s Tilt motion:

1.Press the Menu button to unlock the menu system or to move back up the system to the top level menus.

2.Using the left and right arrows on the Navigation button, scroll through the top level to SET PARAMETERS MENU and press the Enter button to select.

3.Using the left and right arrows on the Navigation button, scroll to TILT INVERT. The current state (ENABLED or DISABLED) will be displayed.

DL.1 User Manual

Fixture Operation 3-7

3

Image 39
Contents Page US and the Americas Contacting High End SystemsDeclaration of Conformity FCC Information Product Modification WarningSymbols Important Safety InformationPatents Warranty InformationVii What You Should Know About Copyright Table of Contents Chapter Fixture Operation DMX Programming Chapter General Maintenance and Troubleshooting List of Figures DL.1 Fixture DimensionsXiv Operation FeaturesOptional Digital Eye Technology Optional AccessoriesPhysical Specifications SpecificationsElectrical Specifications Projector SpecificationsEnvironmental Specifications Cable and Connector Specifications Video ConnectorsDMX and RS-485 Projector Link Features and Specifications Unpacking the Fixture Replacing the Power Cord CapConnecting Video Installing a Line Cord Cap U.K. OnlyVatic Fitter Heads Information Danmark Input Source Mounting the Fixture Recommended Mounting OrientationFog Machine Warning Clamps Mounting the Fixture UprightTruss Mounting Verifying the Truss SupportAttaching the Mounting brackets Mounting ProcedureDMX Data Cables Data Cabling and ConnectorsCable Connectors Linking the FixturesXLR 5-pin connector Setting up the LinkPowering On the Fixture Installing a TerminatorHoming the Fixture Viewing the Display Panel Verifying and Uploading Fixture SoftwareDL.1 menu system navigation buttons Setting the DMX Start ChannelLocking Pan and Tilt Positions Shutting Down the FixtureChapter Fixture Operation TalkBack Support for Remote AccessNavigational Basics Menu DisplayDisplay in Menu Locked Mode Unlocking the Menu SystemExiting the Menu System Description/Notes Menu MapHome Fixture ALL DMX Address Menu Setting a DMX Start ChannelFactory Default Settings Menu Option DescriptionsPan/Tilt Swap Pan InvertTilt Invert Data Loss Timeout Display LevelProjector Input Source Reset Projector Hours Projector Default?Striking the Projector Lamp Projector In By DMX?Iris Version Zoom Override Menu Focus Override MenuProjector Control Camera Option New Air Filter Align Pan MotorsCrossloading Fixture Software Fixture Mode MenuCopying the Boot Code Test Options MenuHoming the Fixture Information Menu Self Test MenuUnique Number DMX Values Menu Temperatures MenuLamp Hours Fixture Hours ResetProjector Hours Reset Fixture HoursTo Display Errors Display ErrorsFixture Operation Fixture Libraries DMX Programming OverviewBit vs -bit DMX Lighting ConsolesBit DMX DMX Output DisplaysStandard Movement and Projection Controls Parameter DescriptionsControl Function Options Changing Projector Source Input Digital Eye Technology Control Standard DL.1 Protocol DL.1 Protocol TablesEnhanced DL.1 Protocol DefaultMaintaining the Filtering System Chapter General Maintenance TroubleshootingReplacing Filters Replacing PartsReassemble the fixture Replacing the LampReplacing the Fuse Replacing the FuseCleaning or Replacing the Front Window Cleaning or Replacing the Front WindowReplacing a Driver Board Driver board configurationsReplacing 3-Phase Board Replacing 2-Phase BoardLED States General TroubleshootingSteady Orange Receiving information from 2 & 3 phase Boards Addressing screw and LED locations Problem Solution General Troubleshooting SuggestionsGeneral Maintenance and Troubleshooting Appendix a Safety Information Appendice a Importantes Informations Sur La Sécurité Marron phase Bleu neutre Vert/jaune terreAnhang a Wichtige Hinweise Für Ihre Sicherheit Warnung Zum Schutz Vor BrandgefahrWarnung Zum Schutz Gegen Gefährliche Körperströme Advertencia Para Protección Continua Contra Incendios Apéndice a Información Importante De SeguridadAvvertenza Per Prevenire Le Scosse Elettriche Appendice a Importanti Informazioni Di SicurezzaVigtig Sikkerhedsinformation Avvertenza Per Prevenire IncendiSafety Information Appendix B MSpeed Conversion Table Time Dec Hex MSpeed Conversion Table

DL1 specifications

The High End Systems DL1 is a cutting-edge digital light fixture designed for dynamic and engaging lighting applications in the entertainment industry. Known for its versatility, high performance, and user-friendly interface, the DL1 has become a staple in various venues, including theaters, concert halls, and corporate events.

One of the standout features of the DL1 is its advanced digital projection technology. This fixture combines powerful imaging capabilities with high-quality optical components, allowing users to project vibrant images, videos, and animations onto various surfaces. The DL1 boasts a high-resolution output and color fidelity, ensuring that visuals are displayed with stunning clarity and richness. This makes it an excellent choice for productions requiring intricate image presentations.

In terms of flexibility, the DL1 offers an impressive range of features tailored for live events. It comes equipped with a highly configurable lens system that allows users to alter the beam angle, focusing on the fine details or casting a wider light for broader coverage. This adaptability is coupled with a robust gobo system, enabling designers to create dynamic patterns and shapes that can enhance any performance setting.

The DL1 integrates seamlessly into existing lighting rigs, thanks to its compatibility with industry-standard control protocols, such as DMX and Art-Net. This allows for precise control and integration with other lighting fixtures, providing designers and operators with extensive creative possibilities. Its on-board programming features also empower designers to set up shows quickly and efficiently, reducing time spent on setup and increasing the focus on artistic direction.

In terms of construction and durability, the DL1 is built to withstand the rigors of tour and rental environments. Its rugged yet lightweight design ensures reliability, while the efficient cooling system prolongs the lifespan of its internal components. This durability is essential for maintaining peak performance during demanding shows and events.

Lastly, the High End Systems DL1 emphasizes ease of use. With an intuitive user interface and robust onboard capabilities, operators can quickly navigate settings and access features, making it ideal for both novice and experienced lighting designers. The combination of its innovative technology, flexible features, and ease of use firmly establishes the DL1 as an essential tool for any modern lighting designer looking to enhance their productions with high-impact visuals.