3.5.3Composite Pass Through (Toggle) (Not available from IR remote mouse)
This control determines whether the Composite television input on Channel A is routed through to Channel B or not.
If the signal is “passed through” Composite television that is input on Channel A will appear as an output on Channel B. If the signal is not passed through, Channel B Composite television will be configured as a second Composite television input. The default is Channel B configured as an input.
Composite Channel B Configuration is indicated by “COMP B=PASS” or “COMP B=IN” on the QuadScan’s Front Panel Display.
3.6Output Sync Signal Configuration
3.6.1Output Sync Signal Configuration (Multiple) (Not available from IR remote mouse)
This control determines where output video synchronization signals will be placed
Output Sync | Front Panel Designation |
Separate H and V (pins 13 and 14) | Osync= 5WIRE |
Separate Composite (pin 14) | Osync= 4WIRE |
Composite Sync on Green (pin 2) | Osync= 3WIRE |
The Default is Separate Composite Sync (H and V) on pin 2.
3.7Display Device Configuration
3.7.1Display Device Configuration (Multiple) (Not available from IR remote mouse)
The Display Device Configuration operates in conjunction with the Input Aspect Ratio and the Output Screen Aspect Ratio to provide the correct scaling for the particular output. Several resolutions are supported as follows:
Resolution | Aspect Ratio | Mode Title |
720 x 480 (NTSC) | 4:3 | DBL TV |
720 x 576 (PAL) | 4:3 | DBL TV |
640 x 480 | 4:3 | VGA |
800 x 600 | 4:3 | SVGA |
1024 x 768 | 4:3 | XGA |
720 x 720 (NTSC) | 16:9 | TRIPLE TV |
720 x 864 (PAL) | 16:9 | TRIPLE TV |
720 x 960 (NTSC) | 16:9 | QUAD TV |
720 x 1152 (PAL) | 16:9 | QUAD TV |
1280 x 720 | 16:9 | HDTV |
1365 x 1024 | 4:3 |
The Default is DBL TV **
TView QuadScan User's Manual
19