Lumens Technology VC-G50 quick start How to remove

Page 16

4.2.2.6How to remove

1.Remove the connecting wires from the camera

2.Uninstall the camera together with the ceiling, loosen the three screws that fix the metal plates A and B and push to the left to remove the machine

3. Then remove the screws on the hanger and the machine

English - 15

Image 16

Contents Camera Installation Guide English Table of Contents DIP Switch Setting Copyright Information Safety Instructions  Precautions  FCC Warning EN55022 CE Radiation Warning  KCC WarningPackage Contents Product Overview Description of LED indicatorOverview Instruction for installation Preparation before installationInstruction for installation Would like to install VC-G50 on the deskWould like to install VC-G50 on the ceiling DimensionSize Diagram Page Bottom of machine English Precautions for installation Installation stepsPage How to remove Connecting the device Image outputConnecting to a Hdtv 3G-SDI Controlling VCs with the computer Remote Control and Setting Menu Functions of remote controlSetting menu Manual Gain 0dBManual Speed Gain Limit 30dBOff AutoWhite BalanceImage Mode Mode5Mode1 LoadPreset Speed Tilt Down 30~0Zoom Limit 150 deg/secFactory Reset StatusWould like to switch to VC-G50 Would like to adjust the shooting angle of the lensWould like to save the current lens position data Would like to clear the saved position dataWould like to adjust the focal length Would like to adjust the focus speedWould like to set the image mode Would like to freeze imagesWould like to rotate the image Would like to change the camera directionDIP Switch Setting Output SwitchSystem Switch Camera Address Selector1 RS-422 Pin Description RS-422 ConnectionUse RS-422 Connection Page Troubleshooting RS-232/RS422