Gateway L110 manual USB Device Assignments, Introducing the USB Port Assignments setup

Software Installation and Operation

2-54

USB Device Assignment(s)

The USB port in the Host PC can be set to use USB storage devices connected to the Host PC in each OfficeStation. When a USB storage device is connected, the USB storage devices connected to each port is shown on the screen. Change the settings by clicking the applicable port for each USB storage device connected that is to be used in the OfficeStation or applicable Host PC.

The setting window appears when the applicable port is clicked as shown in the figure to the right.

The default setting is “Use the default prevention setting from the system settings”. This setting is allowed to be used for the Host PC and OfficeStation. To use USB storage device in the Host PC and OfficeStation, deselect default setting and click OfficeStation or main console(refers to Host PC).

USB-Device Assignments only supports USB type storage device. It does not support USB keyboard or other devices.

Introducing the USB Port Assignment(s) setup

Setting up the USB Port Assignment(s) from the NCT-2000-XP Console.

Click “Software Settings(local)” menu from the NCT-2000-XP Console.

Click “USB device Assignment(s)” setup menu.

Click “ROOT hub” then select the appropriate port.