What to do when these messages are displayed
Message | Cause (Contents) |
|
|
When the “Lamp time” reaches 1000 hours
[A message indicating “1000h” appears on the projected screen.
1000h | • Press [EXIT] button to delete the message. |
| |
| EXIT |
Lamp replacement
EXIT
At the moment when the accumulated lamp time reaches 1900 hours, a “Lamp replacement” message will be displayed.
In addition, when the accumulated lamp time reaches between 1900 hours to 2000 hours, the “Lamp replacement” message will be displayed each time the projector is turned on.
●The message can be cleared by pressing the [EXIT] button or dis- playing the menu.
[Get ready a new lamp (lamp unit) in advance or replace as soon as possible.
Lamp replacement
Warning
EXIT
The word “Warning” appears and blinks when the accumulated lamp time reaches 2000 hours.
The message can be cleared by pressing the [EXIT] button. However, the same message will
Once the projector is turned off, it cannot be turned on again if the accumu- lated lamp time has exceeded 2000 hours.
When the accumulated lamp time reaches 2010 hours, the projector shuts down and cannot be turned on again.
[Replace the
Note
•The message display language corresponds to the menu language setting. This is set to [English] when the projector is bought. The dis- play language can be selected from among 8 languages. (☞ page 39) However, the input mode ([PC1], [PC2], [PC3], [Y/C], [VIDEO]) and button indications ([FREEZE], [D.ZOOM], [EXIT]) are only displayed in English irrespective of the display language setting.
54