7BLUE CUTOFF
Adjusts the blue
•MIN O MAX (in 155 grades)
7RED CUTOFF
Adjusts the red
•MIN O MAX (in 155 grades)
SIZE/POSI. ADJ.
Adjusts the size and position of the picture.
7H. SIZE
Adjusts the horizontal screen size.
•–20 O 00 O +20 (*)
+: Enlarges the screen size horizontally.
*You can adjust this item with in the range between 00 and +20 during the
7H. POSITION
Adjusts the horizontal screen position.
•–20 O 00 O +20
+: Moves the screen to the right.
7V. SIZE
Adjusts the vertical screen size.
•–20 O 00 O +20
+: Enlarges the screen size vertically.
7V. POSITION
Adjusts the vertical screen position.
•–10 O 00 O +10
+: Moves the screen up.
DISTORTION ADJ.
Compensates the picture distortion.
Also compensates the picture tilt which is caused by geomagnetic influence.
7PARALLELOGRAM
Compensates the parallelogram picture distortion.
•–20 O 00 O +20
+: Moves the upper side of the picture to the left, and the lower side to the right.
7TRAPEZOID
Compensates the trapezoid picture distortion.
•–20 O 00 O +20
+: Reduces the upper side of the picture.
7ROTATION
Compensates a picture tilt.
•–31 O 00 O +31
+: Turns the picture counterclockwise.
STATUS DISPLAY
Sets the item related to turning on/off the status display.
7STATUS DISPLAY Sets the status display.
• AUTO/MANUAL/OFF
☞“About the status display” on page 5
CONTROL LOCK
Prohibits altering the monitor operations except turning the monitor on/off and deactivating this function.
• ON/OFF
NOTES:
•When “CONTROL LOCK” is set to “ON,” “
Control lock on!” appears on the screen if you try to operate the monitor.
•Operating the monitor by the external control is available if this function is activated.
all reset
Resets all the settings you have made to
•Adjustments made by using the front panel buttons will also be reset.
1.Move the MENU/VOLUME control to 
/ 
to select “all reset,” then move it to 
. Confirmation message is displayed.
2.To initialize, move the MENU/VOLUME control to 
.
•To cancel the initialization, press the MENU/ VOLUME control.
13