Connecting the Amplifier—Continued
Connecting the Speaker Cables
1 Strip about 1/2" to 5/8"
(12 to 15 mm) of insu- lation from the ends of the speaker cables, and twist the bare wires tightly, as shown.
1/2" to 5/8"
(12 to 15 mm)
3 Fully insert the bare wires.
4 Screw the terminal tight.
2 Unscrew the terminal.
The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURR BACK L terminal.
Note:
If you use front high or front wide speakers, you must turn on the AV controller and select the speakers to be used. For more details, see the instruction manual of the connected component.
Select 4Ω or 6Ω.
Surround | Front right | Center | Front left | Surround | ||||||
right | speaker | speaker | speaker | left | ||||||
speaker |
|
|
| speaker | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front high/wide | Surround | Surround | Front high/wide |
right speaker | back right | back left | left speaker |
| speaker | speaker |
|
12