Onkyo PA-MC5500 instruction manual Specifications, Audio Inputs, Speaker Outputs, Control Terminal

Specifications

Amplifier section

Rated Output Power
All channels:	North American:
	150 watts minimum continuous
	power per channel, 8 ohm loads, 2
	channels driven from 20 Hz to
	20 kHz, with a maximum total
	harmonic distortion of 0.05% (FTC)
	175 watts minimum continuous
	power per channel, 8 ohm loads, 2
	channels driven at 1 kHz, with a
	maximum total harmonic distortion
	of 0.7% (FTC)
	185 watts minimum continuous
	power per channel, 6 ohm loads, 2
	channels driven at 1 kHz, with a
	maximum total harmonic distortion
	of 0.1% (FTC)
	Others:
	9 ch ⋅ 220 W at 6 ohms, 1 kHz, 1 ch
	driven (IEC)
Maximum Effective Output Power
	Asian:
	9 ch ⋅ 280 W at 6 ohms, 1 kHz, 1 ch
	driven (JEITA)
Dynamic Power	400 W (3 Ω, Front)
	300 W (4 Ω, Front)
	180 W (8 Ω, Front)
THD (Total Harmonic Distortion)
	0.05 % (Power Rated)
Damping Factor	60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance

1V, 47 kΩ (Unbalanced)

2V, 22 kΩ (Balanced)

Frequency Response	5 Hz - 100 kHz/+1 dB - 3 dB
Signal to Noise Ratio	110 dB (Unbalanced, IHF-A)
Speaker Impedance	4 Ω - 16 Ω

General

Power Supply	North American:
	AC 120 V, 60 Hz
	Others:
	AC 220 - 240 V, 50/60 Hz
Power Consumption	North American: 11.7 A
	Others: 1050 W
Dimensions (W ⋅ H ⋅ D)
	435 ⋅ 198.5 ⋅ 458.5 mm
	17-1/8" ⋅ 7-13/16" ⋅ 18-1/16"
Weight	23 kg (50.7 lbs.)

■Audio Inputs

Balance Inputs	9
Unbalance Inputs	9

■Speaker Outputs

FL, FR, C, SL, SR, SBL, SBR, LH, RH

■Control Terminal

12 V Trigger In 1

Specifications and features are subject to change without notice.

19