Onkyo PA-MC5500 instruction manual Multiroom Connections, AV controller Zone, Main room

Page 16

Connecting the Amplifier—Continued

Multiroom Connections

You can use three speaker systems with this amplifier—a surround-sound speaker system in your main listening room, Zone 2: a stereo speaker system in a second room, Zone 3: a stereo speaker system in a third room. The following examples are based on using the amplifier with the AV controller, PR-SC5507. For more details, see the instruction manual of the connected component.

Notes:

Please make sure that your AV controller has the multi-zone capability.

Once you’ve completed multi-zone connections shown below, you must turn on the AV controller and configure it to enable the multi-zone capability.

If your AV controller has balanced outputs for multiroom versatility, you can also use the balanced inputs on the amplifier.

Connection 1

Main room: You can enjoy up to 5-channel surround-sound playback.

Zone 2: You can enjoy 2-channel stereo playback and video playback.

Zone 3: You can enjoy 2-channel stereo playback.

Zone 2

Front right

Front left

speaker

speaker

Make either connection.

AV controller

Zone 3

Front right

Front left

speaker

speaker

The amplifier

See page 13 or 14 for the connection.

Main room

Surround right

Front right Center speaker

Front left

Surround left

speaker

speaker

speaker

speaker

16

Image 16
Contents Operations Before usingAppendix Important Safety Instructions AvisPrecautions PowerPreventing Hearing Loss Caution Batteries and Heat Exposure WarningFeatures PrecautionsContents Supplied AccessoriesAmplifier Precautions Press the Power switch Press the ON/STANDBY button. The on indicator lights blueSlowly increase the control amplifier volume Quick Operation GuidePower switch Standby indicator On indicatorFront & Rear Panels Front PanelFront & Rear Panels Rear PanelBalanced Input XLR terminal Plugging the XLR cableInput Select switch Speaker Impedance switchAuto Power Down switch Unbalanced Input single end RCA inputConnecting the Amplifier Connecting Your SpeakersSpeaker Color North American modelsConnecting the Amplifier To 5/8 12 to 15 mmAmplifier Connecting to an AV Controller with XLR outputAV controller Connecting to an AV Controller with RCA output Bi-amping the Front Speakers AV controller AmplifierMultiroom Connections ConnectionZone AV controller ZoneZone Make either connection AV controller Troubleshooting No powerPower turns on but no sound Standby indicator flashes redSpecifications Audio InputsSpeaker Outputs Control TerminalOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch