Menu Configuration—SET-UP MENU
COLOR TEMP.
Item | To do | Setting value |
COLOR TEMP. | Display the color temperature. |
|
R DRIVE, G DRIVE, | Adjust the drive level of each color (red, green, and blue). | MIN += 000 += MAX |
INFORMATION
Item | To do | Setting value |
STATUS DISPLAY Set if you want the information of the current input to | AUTO, OFF | |
| be displayed on the screen (see “Displaying the current |
|
| status” on page 11). |
|
B DRIVE |
| (in 256 grades) |
R CUT OFF, G CUT | Adjust the | MIN += 000 += MAX |
OFF, B CUT OFF | blue). | (in 256 grades) |
reset | Restore the default setting for all the items in “COLOR TEMP.” | |
•Adjust the color temperature after selecting color temperature (HIGH, MID, LOW, or USER) on the main menu (see “PICTURE SETTING” on page 13).
SYNC FUNCTION
SUB HOUR METER
reset
MODEL
VERSION
HOUR METER
Display the hours of current use (unit: hour). You can reset only this item by pressing 3.
Restore the default setting for “STATUS DISPLAY” and “SUB HOUR METER.”
Display the model name and version of the monitor. This item is used for maintenance of the monitor.
Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. This item cannot be reset.
Item | To do | Setting value |
NO SYNC ACTION | Select the screen color or the screen status applied when | OFF, GRAY BACK (gray |
| no signal is coming in. | screen), POWER SAVE |
|
| (power save), RED, |
|
| GREEN, BLUE |
DELAY TIME | Set the time to change the screen color/screen status | 30sec., 5min., 15min. |
| set in “NO SYNC ACTION” above after |
|
| stopped. |
|
reset | Restore the default setting for all the items in “SYNC FUNCTION.” | |
• While the Dual Display is activated, the Sync Function works only for the main window.
REMOTE SYSTEM
Item | To do | Setting value |
ID | Assign the ID to the monitor. | 01 += 25 |
REMOTE IN SEL. | Select the input terminal used for external control. | |
|
| |
|
| output), LAN (Ethernet |
|
| terminal) |
CNT. RJ45 OUT | Select the external control method for | RS485, IR OUT |
| terminal. |
|
CNT. RJ45 IN | Select the external control method for | RS485, MAKE, TRIG., |
|
| SET |
PORT F1 – PORT | Assign the control function to the | – – – (no function), |
F5 | pins (1 to 5) when selecting “SET” in “CNT. RJ45 IN” | VIDEO, RGB, DVI, |
| above. | POWER, ASPECT, |
|
| MUTING, PIP, PBP |
reset | Restore the default setting for all the items in “REMOTE SYSTEM.” | |
• For details about external control, see pages 20 to 25.
SECURITY LOCK
Item | To do | Setting value |
SECURITY LOCK | Activate/deactivate the Security Lock. | ON, OFF |
PASS ID SETTING | Set the password for the Security Lock. | 4 numbers |
• For details about the Security Lock, see page 17.
15