Using the Motion Sensor | 18 |
|
|
Outline of the motion sensor
By connecting the supplied motion sensor, you can set the monitor to perform the specified operation when the sensor detects the motion of human around the monitor. The status of the monitor returns automatically to that before detecting human if the sensor does not detect any motion for a certain period of time.
The sensor is the pyroelectric
Operations controlled by the motion sensor
(1)Turning the monitor on/off When the sensor detects the motion of human around the monitor, the monitor turns on.
(2)Changing the volume level When the sensor detects the motion of human around the volume level changes to the specified level.
(3) Changing the input | When the sensor detects the motion of human around the monitor, the |
| input changes. |
(4)Switching the main display When the sensor detects the motion of human around the monitor with
and sub display for Dual the Dual Display activated, the main display and sub display switch.
Display
(5)Changing the backlight When the sensor detects the motion of human around the brightness
brightness | level changes to the specified level. |
Example: When the setting (4) above is activated...
Installation and connection
The motion sensor can be attached to either of 24 screw holes on the main unit (5 screw holes on the top and bottom, and 7 on the right and left side). Choose an appropriate position according to the installation place of the monitor. The cable length of the sensor is about 1.5m (5 feet).
CAUTION
• Firmly attach the sensor to prevent the sensor from falling.
Displaying A on the main window and B on the sub
Detection range of the sensor
about |
| about 80° | |
|
| ||
5 m | about 100° | ||
|
| ||
|
|
|
|
|
|
|
|
A and B switches after detection.
NOTE
•The detection area above is reference. The actual detection range may differ depending on temperature, size of the moving human, color of cloth, moving speed and direction, etc.
• The sensor can detects only a moving human in the detection area.
•The sensor detects the motion of a human more sensitive if the human is close to the motion sensor.
•Do not touch the
•Glass between the sensor and human much reduces the sensitivity.
Not available when the monitor is | The bottom and the right side have screw holes at the same positions |
installed using the supplied stand. | as those on the top and the right side, respectively. |
Cord cramp (supplied)
tape 
Stick the supplied cord cramp on the back of the main unit and lace the sensor cable through the cramp.
Angle of the sensor
You can adjust the vertical angle of the motion sensor. Change the screw holes on the sides of the sensor to upper ones and adjust the angle.
Change the screw holes to upper ones.