JVC DT-V17L2D manual To adjust the stand height, To prevent an accidental fall, Fixing the monitor

To adjust the stand height

You can select the stand height—higher position or lower position.

To change the stand height, change the position of the stand plate as illustrated below after detaching the stand from the monitor.

• For detaching the stand, see “To detach the stand” on page 4.

<Higher position>	<Lower position>
Screw holes for higher position	Screw holes for lower position

Stand plate

Stand plate

Stand body Stand body

To prevent an accidental fall

Fix the monitor to a wall by using strings.

Fixing the monitor

Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string.

Hook and screws (M4 x 10 mm) (not provided)

Hook (not provided)

ENGLISH5