Menu Operations | Audio Channel Selection |
|
|
About the Information Display
About the Status Display
1 Display the menu.
To display the MAIN MENU
\Press MENU button.
To display the SET-UP MENU
\Press 
button while pressing 
button.
MAIN MENU
Selected item
Operation guide
Selected item |
Operation guide |
2 Press 
buttons to select an item, then press button.
For some items, adjustments will be made by
pressing .
Ex.: When “AREA MARKER” in the
MAIN MENU is selected
3 Press 
buttons to select an item,
then press 
buttons to make adjustments.
4 Press MENU button to return to the previous menu.
Pressing the button again finishes the menu operation.
Select audio channels emitted from the speakers (L/R) and the MONITOR OUT (L/R) terminals, when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI terminal (IN1 or IN2) and SDI input (1 or 2) is selected.
•You have to choose a group of selectable audio channels before the channel selection (☞ “E.AUDIO GROUP” in “AUDIO SETTING” on page 11).
1 Press or button when a menu is not displayed.
The screen for audio channel selection is displayed.
•The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation.
Audio channel selection screen
Selected item
2 Press 
buttons to select the left (L ch) or right (R ch).
3 Press 
buttons to select an audio channel.
•Each time you press the button, the audio channel changes according to the settings of “E.AUDIO GROUP” (☞ “NOTE” on page 11).
4 Press MENU button.
The screen for audio channel selection disappears.
•The setting is memorized for each input (SDI 1 and SDI 2).
The monitor displays the information below depending on the settings of the menu and buttons.
•Select the position of the information display (☞ “POSITION” in “INFORMATION” on page 13).
1Audio level meter
•Not displayed when “LEVEL METER ch” is set to “OFF.”
☞“AUDIO SETTING” on page 11
2 Signal format
• “*” is displayed at the end of the indication when a
• “NO SYNC” is displayed when no video signal comes in.
• “Out of range” is displayed for a noncompliant video signal input.
• When “COLOR SYSTEM” is set to “AUTO” and the noncompliant composite video signals come in, “OTHERS” is displayed (☞ “FUNCTION SETTING” on page 12).
• Not displayed when “OFF” or “AUTO” is selected for “STATUS DISPLAY.”
3 Source name assigned in “CHARACTER
SET.”
• Displayed when “SOURCE ID” is set to “ON.”
• Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO.”
☞“INFORMATION” on page 13
4Time code
☞“ u T.C. (time code) button/lamp” on page 6
• When the input signal includes no time code, “TC –
5CRC error indication
☞“CRC ERROR” in “INFORMATION” on page
13
• A red square is displayed when an error occurs.
•When any information of 1, 2, 3, or 5 above is displayed while signals come in from equipment other than a computer, the picture is displayed without overlapping the information display area. However, when displaying the picture with higher resolution than the resolution of the panel in 1:1 mode, the information display will overlap with the picture.
If you press the INPUT SELECT button of the current input, the status of the input signal and setting of muting are displayed for about 3 seconds.
•When “STATUS DISPLAY” is set to “AUTO” or “ON,” the status below is also displayed in the following cases (☞ “INFORMATION” on page 13):
–When you change the input
–When the signal condition of the current input changes
–When you turn on the monitor
1Signal format
•“*” is displayed at the end of the indication when a
•“NO SYNC” is displayed when no video signal comes in.
•“Out of range” is displayed for a noncompliant video signal input.
•When “COLOR SYSTEM” is set to “AUTO”
and the noncompliant composite video signals come in, “OTHERS” is displayed (☞ “FUNCTION SETTING” on page 12).
2Signal form of DVI input
☞“DVI INPUT SEL.” on page 10
3 Setting of “MUTING”
☞“ 4 MUTING button” on page 6
• Displayed only when muting is activated.
ENGLISH7