JVC KS-PD100 Operations from the control panel-For Type B, To stop or start playback Press ∞

Operations from the control panel—For Type B

How the buttons on the control panel work as the D. player’s controls

• : functions after MODE is pressed. To restore the original function, press MODE again.

During playback		When selecting a track from the Top Menu
	(Enters the Top Menu)	(Moves back to the previous layer)
		∞ (Selects the
2	3	next items)
		5 (Selects the
	37 (Play/Stop)	previous items)
		ENTER (Confirms the selection)
	Repeat Mode*1	Repeat Mode*1
	Random Play*1	Random Play*1

Basic operation

To select a track:

•Press ¢ to go to the next tracks.

•Press 4 to go to the beginning of the current track and the previous tracks.

To fast-forward or reverse a track:

•Press and hold ¢ to fast-forward.

•Press and hold 4 to reverse.

To stop or start playback: Press ∞.

Each time you press the button, the playback stops and resumes alternately.

Selecting playback modes*3

Repeat play*4: After pressing MODE, press 5 repeatedly to select a desired repeat mode.*1

•Track: Functions the same as “Repeat Mode One” of the D. player.

•Disc: Functions the same as “Repeat Mode All” of the D. player.

To cancel, select Off.

Random play*4: After pressing MODE, press 6 repeatedly to select All or MAG, so that “Random Play” is activated.

To cancel, select Off.

Selecting a track from the Top Menu

1 Press 5 to enter the Top Menu.*2

2 Press ¢ or 4 to select an item, then press

∞to confirm the selection.

When the selected item has a next layer, you will enter the layer. Repeat the procedure until the desired track is confirmed.

•You can also skip 10 items at a time by pressing and holding ¢ or 4.

•To move back to the previous layer, press 5.

*1 For some receivers, the number buttons for selecting playback modes are different. Refer to the instructions supplied with the receiver.

*2 The menu selecting mode will be canceled;

–If no operations are done for about 5 seconds.

–When you confirm the selection of a track.

*3 For the receivers which show “CD-CH (CD-Changer)” when the D. player is selected as the source, you can use only one of the playback modes at the same time.

*4 While any playback mode is selected, the corresponding indicator lights up on the display of the receiver.

7