Operations from the control panel—For Type C
How the buttons on the control panel work as the D. player’s controls
• 
: functions when you press and hold the button.
During playback
(Enters the Top Menu)
2 | 3 |
37(Play/Stop)
When selecting a track from the Top Menu
(Moves back to the previous layer)
∞ (Selects the next items)
Skips next 10 items
5 (Selects the previous items)
Skips previous 10 items ENTER (Confirms the selection)
Basic operation
To select a track:
•Press ¢ to go to the next tracks.
•Press 4 to go to the beginning of the current track and the previous tracks.
To
•Press and hold ¢ to
•Press and hold 4 to reverse.
To stop or start playback: Press ∞.
Each time you press the button, the playback stops and resumes alternately.
Selecting a track from the Top Menu
1 Press 5 to enter the Top Menu.*1
2 Press ¢ or 4 to select an item, then press
∞to confirm the selection.
When the selected item has a next layer, you will enter the layer. Repeat the procedure until the desired track is confirmed.
•You can also skip 10 items at a time by pressing and holding ¢ or 4.
•To move back to the previous layer, press 5.
Selecting playback modes*2
•Refer to the operation of playback modes section of the instructions supplied with the receiver.
Repeat play*3: Select one of the followings:
•Track: Functions the same as “Repeat Mode One” of the D. player.
•Disc: Functions the same as “Repeat Mode
All” of the D. player.
To cancel, select Off.
Random play*3: Select All or MAG to activate “Random Play.”
To cancel, select Off.
*1 The menu selecting mode will be canceled;
–If no operations are done for about 5 seconds.
–When you confirm the selection of a track.
*2 For the receivers which show
*3 While any playback mode is selected, the corresponding indicator lights up on the display of the receiver.
8