Operations from the control panel—For Type A
How the buttons on the control panel work as the D. player’s controls
• 
: functions after MODE is pressed. To restore the original function, press MODE again.
During playback | When selecting a track from the Top Menu |
3 | ∞ (Selects the next items) |
(Enters the Top Menu) | (Moves back to the previous layer) |
2 | 5 (Selects the previous items) |
37 (Play/Stop) | ENTER (Confirms the selection) |
Repeat Mode*1 | Repeat Mode*1 |
Random Play*1 | Random Play*1 |
Basic operation
To select a track:
•Press ¢ to go to the next tracks.
•Press 4 to go to the beginning of the current track and the previous tracks.
To
•Press and hold ¢ to
•Press and hold 4 to reverse.
To stop or start playback: After pressing MODE, press 4.
Each time you press 4 after pressing MODE, the playback stops and resumes alternately.
Selecting playback modes*3
Repeat play*4: After pressing MODE, press 5 repeatedly to select a desired repeat mode.*1
•Track: Functions the same as “Repeat Mode One” of the D. player.
•Disc: Functions the same as “Repeat Mode All” of the D. player.
To cancel, select Off.
Random play*4: After pressing MODE, press 6 repeatedly to select All or MAG, so that “Random Play” is activated.
To cancel, select Off.
Selecting a track from the Top Menu
1 After pressing MODE, press ¢ to enter the Top Menu.*2
2 Press MODE.
3 Press ¢ or 4 to select an item.
4 After pressing MODE, press 4 to confirm the selection.
When the selected item has a next layer, you will enter the layer. To move back to the previous layer, press ¢ after pressing MODE.
5 Repeat steps 2 to 4 until the desired track is confirmed.
•You can also skip 10 items at a time by pressing and holding ¢ or 4.
*1 For some receivers, the number buttons for selecting playback modes are different. Refer to the instructions supplied with the receiver.
*2 The menu selecting mode will be canceled;
–If no operations are done for about 5 seconds.
–When you confirm the selection of a track.
*3 For the receivers which show
*4 While any playback mode is selected, the corresponding indicator lights up on the display of the receiver.
6