
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms | Causes | Remedies |
• The D. player does not turn | Firmware version needs to be | Update the firmware version of |
on, or does not work. | updated. | your D. player. |
• The D. player does not turn | The battery of the D. player has | Charge the battery of the D. |
on. | run out. | player. |
• Buttons do not work as | The functions of the buttons | Press MODE (or OK) before |
intended. | have been changed. | performing the operation. |
• The sound is distorted. | The equalizer is activated on | Deactivate the equalizer either |
| both the receiver and the D. | on the receiver or the D. player. |
| player. |
|
•No sound is played. (“Not Connected” appears on the display of the D. player.)
•“ERROR 01” appears on the display of the receiver.
Connections are incorrect, or communication failure occurs between this adapter and the D. player.
Disconnect the adapter from the D. player. Then, connect it again.
•“NO MAG (Magazine),” “NO Connections are incorrect. DP,” or “Disconnect” appears
on the display of the receiver.
Check the connecting cable and its connection.
•“NO TRACK” appears on the display of the receiver.
No tracks are stored in the D. | Import tracks to the D. player. |
player. |
|
• “RESET 1 (R1)” – “RESET 7 | Communication failure occurs | Disconnect the adapter from |
(R7)” appears on the display | between this adapter and the D. | both the receiver and the D. |
of the receiver. | player/the receiver. | player. Then, connect it again. |
• “RESET 8 (R8)” appears on | Communication failure occurs | Check the connection between |
the display of the receiver. | between this adapter and the | this adapter and the receiver. |
| receiver. |
|
•The D. player’s controls do not work after disconnecting from this adapter.
Communication failure occurs Reset the D. player. between this adapter and the D.
player.
15