JVC DLA-HD750 manual Connecting via PC Cable, Connecting via Trigger Cable, This unit Screen

Page 22

2 Preparation

Connecting(Continued)

Connecting via PC Cable

This unit

Notebook PC

To PC input terminal

PC cablesold separately

VGA output terminal

Connecting via Trigger Cable

This unit

Screen

SYNC

To Trigger output terminal

CAUTION

Trigger cable

(sold separately)

 

Trigger input terminal

 

(Φ3.5)

Do not supply the power to the other devices.

Do not connect audio terminals of the other devices such as

headphones etc. Otherwise, this may cause a malfunction of the other devices or injury.

Using beyond the rated value will cause malfunction.

Exercise adequate caution to prevent short circuit as the trigger terminal outputs a voltage of 12V.

22

Image 22
Contents DLA-HD750 PB006597999-0Machine Noise Information Germany only SafetySafetyPrecautionsPrecautionsAbout the installation place ManufacturerDo not allow any unqualified person to install the unit EnglishFor United Kingdom For European continent Countries For USA and Canada only Use only the following power cordPower cord Important Europe onlyPile Produits Battery ProductsBatterie Produkte Batterij ProductenPilha Produtos Baterías/pilas ProductosBatteria Prodotti Μπαταρία ΠροϊόνταBatteri Produkter Akku TuotteetBateria Produkty Батарея ИзделияBaterie Produkty Akkumulátor TermékekTHX Certification THX CertificationMain Features Supports Multiple Digital DevicesPerfect for Any Location Contents About this Manual Check the AccessoriesOptional Accessories Conventions in this manualRear Side/Top Side/Right Side Controls and featuresFront Side/Left Side P26Bottom Surface To turn off the power To control lens P26 Controls and featuresRemote Control To adjust brightness P42 To display test patternWhen directing the remote control toward this unit How to Use the Remote controlEffective Range of Remote Control Unit When reflecting off a screenSelecting Connecting Devices Preparation Connecting via Component Video Cable Connecting Connecting via Video Cable and S-Video Cable This unitConnecting via HDMI-DVI Conversion Cable ConnectingConnecting via Hdmi Cable This unitRGB video output terminals Connecting via SCART-RCA CableConnecting via RGB Video Cable This unit DVD player for European marketConnecting via Trigger Cable Connecting via PC CableThis unit Screen Installing the projector and screen Installing the Projector and ScreenShift Adjustment Set AngleInstalling the Projector Screen LensScreen Size and Projection Distance Projecting Image Focus Zoom Shift Turn off the powerAbout Cool Down mode You can hide the image temporarilyMasking the Surrounding Area of an Image Convenient Features during ProjectionSetting the Screen Size Input ImageMask the image To endDisplay the setting menu Setting MenuProcedures for Menu Operation Select Input Signal AspectVideoSetting Menu Picture AdjustPicture Adjust Color Temp Setting MenuColor Temp Picture Adjust Gamma GammaAdvanced ResetLens Aperture Input Signal Comp Input Signal HdmiComp Input Signal Picture Position Input Signal Video/S-VideoInput Signal PC Input Signal Aspect VideoInput Signal Mask Input Signal Aspect ComputerInput Signal Over Scan Input Signal Film ModeInstallation Installation Style Installation Lens ControlInstallation Pixel Adjust Installation KeystoneDisplay Setup Menu Display Display Setup Back ColorDisplay Setup Menu Position Display Setup Line DisplayFunction Trigger Display Setup LanguageFunction Lamp Power Function Test PatternOff Timer Function Off TimerFunction High Altitude Mode High Altitude ModeAdjust picture quality Changing the Initial Setting Picture ModeSelect picture mode Other items can also be adjusted To endRegistering User-defined Picture Mode from the Menu Registering User-defined Picture ModeSelect the picture mode Register the settingTroubleshooting TroubleshootingHas setting been performed for Is the setup of Control with HdmiIs the image correctly adjusted? Are batteries installed correctly?What to Do When these Messages Are Displayed Indicator Blinking Interval No. Warning Between Content Actions to Be Taken for Warning ModeTime Frequency Loosen the screws on the lamp unit Replacing the LampRemove the lamp cover Pull out the lamp unitAttach the lamp cover Install the new lamp unitTighten the screws of the new lamp unit Tighten the screws with a screwdriverReset the lamp time only when you have replaced the lamp Resetting Lamp TimeAfter replacing the lamp, reset the lamp time Replacing the LampReinstall the inner filter Cleaning and Replacing the FilterClean the filter If the filter is damaged or too dirty to be cleanedCommand Format RS-232C SpecificationsRS-232C Interface Command Type Data description Command and dataEnd RS-232C Interface Remote control codeBinary code Reference command Operating commandType Command Description RS-232C Communication ExamplesDirt on the cabinet Copyright and CautionAbout Trademarks and Copyright Dirt in the air inletsCeiling Mounting this UnitLocations Air inlets Specifications PC compatible signals Front SpecificationsTop Surface Bottom Surface Back Surface
Related manuals
Manual 61 pages 52.05 Kb