JVC DLA-HD750 manual Install the new lamp unit, Tighten the screws of the new lamp unit

Page 49

4Install the new lamp unit

Handle

5Tighten the screws of the new lamp unit

● Tighten the screws with a screwdriver.

6Attach the lamp cover

●Insert the top part (with 2 claws) of the lamp cover into the unit.

●Fasten the screws with a screwdriver.

ENGLISH

CAUTION

●Use only genuine replacement parts for the lamp unit. Also, never attempt to reuse an old lamp unit. This may cause a malfunction.

●Do not touch the surface of a new lamp.

This may shorten the lamp life and cause lamp blowout.

MEMO

After Replacing the Lamp

●Do not place the removed lamp unit at locations that is reachable by children or near combustible items.

●Dispose used lamp units in the same way as fluorescent lamps. Follow your local community rules for disposal.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

Image 49

Contents PB006597999-0 DLA-HD750About the installation place SafetySafetyPrecautionsPrecautionsMachine Noise Information Germany only ManufacturerEnglish Do not allow any unqualified person to install the unitPower cord For USA and Canada only Use only the following power cordFor United Kingdom For European continent Countries Important Europe onlyBatterie Produkte Battery ProductsPile Produits Batterij ProductenBatteria Prodotti Baterías/pilas ProductosPilha Produtos Μπαταρία ΠροϊόνταAkku Tuotteet Batteri ProdukterBaterie Produkty Батарея ИзделияBateria Produkty Akkumulátor TermékekTHX Certification THX CertificationSupports Multiple Digital Devices Main FeaturesPerfect for Any Location Contents Optional Accessories Check the AccessoriesAbout this Manual Conventions in this manualFront Side/Left Side Controls and featuresRear Side/Top Side/Right Side P26Bottom Surface Remote Control Controls and featuresTo turn off the power To control lens P26 To adjust brightness P42 To display test patternEffective Range of Remote Control Unit How to Use the Remote controlWhen directing the remote control toward this unit When reflecting off a screenPreparation Selecting Connecting DevicesConnecting via Video Cable and S-Video Cable ConnectingConnecting via Component Video Cable This unitConnecting via Hdmi Cable ConnectingConnecting via HDMI-DVI Conversion Cable This unitConnecting via RGB Video Cable Connecting via SCART-RCA CableRGB video output terminals This unit DVD player for European marketConnecting via Trigger Cable Connecting via PC CableThis unit Screen Shift Adjustment Installing the Projector and ScreenInstalling the projector and screen Set AngleLens Installing the Projector ScreenScreen Size and Projection Distance Projecting Image About Cool Down mode Turn off the powerFocus Zoom Shift You can hide the image temporarilySetting the Screen Size Convenient Features during ProjectionMasking the Surrounding Area of an Image Input ImageTo end Mask the imageProcedures for Menu Operation Setting MenuDisplay the setting menu Select Input Signal AspectVideoPicture Adjust Setting MenuPicture Adjust Color Temp Setting MenuColor Temp Gamma Picture Adjust GammaAdvanced ResetLens Aperture Input Signal Comp Input Signal HdmiComp Input Signal PC Input Signal Video/S-VideoInput Signal Picture Position Input Signal Aspect VideoInput Signal Over Scan Input Signal Aspect ComputerInput Signal Mask Input Signal Film ModeInstallation Pixel Adjust Installation Lens ControlInstallation Installation Style Installation KeystoneDisplay Setup Menu Position Display Setup Back ColorDisplay Setup Menu Display Display Setup Line DisplayFunction Lamp Power Display Setup LanguageFunction Trigger Function Test PatternFunction High Altitude Mode Function Off TimerOff Timer High Altitude ModeSelect picture mode Changing the Initial Setting Picture ModeAdjust picture quality Other items can also be adjusted To endSelect the picture mode Registering User-defined Picture ModeRegistering User-defined Picture Mode from the Menu Register the settingTroubleshooting TroubleshootingIs the image correctly adjusted? Is the setup of Control with HdmiHas setting been performed for Are batteries installed correctly? What to Do When these Messages Are Displayed Indicator Blinking Interval No. Warning Between Content Actions to Be Taken for Warning ModeTime Frequency Remove the lamp cover Replacing the LampLoosen the screws on the lamp unit Pull out the lamp unitTighten the screws of the new lamp unit Install the new lamp unitAttach the lamp cover Tighten the screws with a screwdriverAfter replacing the lamp, reset the lamp time Resetting Lamp TimeReset the lamp time only when you have replaced the lamp Replacing the LampClean the filter Cleaning and Replacing the FilterReinstall the inner filter If the filter is damaged or too dirty to be cleanedCommand Format RS-232C SpecificationsRS-232C Interface Command Type Data description Command and dataEnd RS-232C Interface Remote control codeBinary code Type Command Description Operating commandReference command RS-232C Communication ExamplesAbout Trademarks and Copyright Copyright and CautionDirt on the cabinet Dirt in the air inletsCeiling Mounting this UnitLocations Air inlets Specifications PC compatible signals Top Surface Bottom Surface SpecificationsFront Back Surface

Related manuals

Manual 61 pages 52.05 Kb