JVC DLA-HD750 manual Input Signal Video/S-Video, Input Signal PC, Input Signal Picture Position

4 Settings

Setting Menu (Continued)

Input Signal > Video/S-Video

13 Video/S-Video

Configures the Video/S-Video input signals.

	NTSC Setup Level	0IRE	Adjusts the gradation for signals without the 7.5 IRE setup.
		7.5IRE	Adjusts the gradation for signals with the 7.5 IRE setup.
● Adjust this only when NTSC signals are input via Video or S-Video terminal.
		Auto	Configures the color system automatically.
		NTSC	Select this when the color system is NTSC.
		NTSC4.43	Select this when the color system is NTSC4.43.
	Color System	PAL	Select this when the color system is PAL.
		PAL-M	Select this when the color system is PAL-M.
		PAL-N	Select this when the color system is PAL-N.
		SECAM	Select this when the color system is SECAM.

●The setting is available only when the Video or S-Video input image is projected.

Input Signal > PC

14 PC

Configures PC input.

Auto Alignment	Automatically adjusts “Tracking”, “Phase” and “Picture Position”.
Tracking	Adjust the horizontal size and display area of the image.
	(This may vary depending on the signal, but does not usually require adjustment.)
Phase	Adjust flickering and blurred images.
	(This may vary depending on the signal, but does not usually require adjustment.)
Picture Position	Adjust the display position of the image.

●This can be set only when selecting PC input terminal.

Input Signal > Picture Position

15Picture Position

Adjusts the horizontal/vertical position of the projected image.

●The position of the image varies depending on the input signals. The image of some signals may not be fully displayed. Adjust the position of image using this menu to display the image properly.

Input Signal > Aspect (Video)

16Aspect (Video)

Configures the screen size of the projected image.

4:3

16:9

Zoom

Sets the screen size of the projected image as 4:3.

Sets the screen size of the projected image as 16:9.

Zooms the images. (This item cannot be selected in the case of HD signals.)

●

●

This setting can also be configured from the remote control. ( P16) The items cannot be set in the case of PC signals.

36