JVC DLA-HD750 manual Installing the Projector and Screen, Set Angle, Shift Adjustment

Page 23

ENGLISH

Installing the Projector and Screen

While installing, please place this unit and the screen perpendicular to each other. Failing to do so may increase trapezoidal distortion. Please refer to “Keystone”. ( P38 - 25 )

Set Angle

● The angle range which can be set for this unit is ±10°.

10°	10°

10°	10°

● Malfunctions may occur if the angle is not set within the above-mentioned range.

Shift Adjustment

1Installing the projector and screen

■Left/Right position

* 0% up/down position (center)

Getting Started

Preparation

Basic Operation

■ Up/Down position

Approximately 34% (maximum) of the projected image

* 0% left/right position (center)

Approximately 80% (maximum) of the projected image

■Shifting range of projected image

80%

34%

Lens center

80%

Settings

Troubleshooting

Others

Image 23

Contents PB006597999-0 DLA-HD750Manufacturer SafetySafetyPrecautionsPrecautionsAbout the installation place Machine Noise Information Germany onlyEnglish Do not allow any unqualified person to install the unitImportant Europe only For USA and Canada only Use only the following power cordPower cord For United Kingdom For European continent CountriesBatterij Producten Battery ProductsBatterie Produkte Pile ProduitsΜπαταρία Προϊόντα Baterías/pilas ProductosBatteria Prodotti Pilha ProdutosAkku Tuotteet Batteri ProdukterAkkumulátor Termékek Батарея ИзделияBaterie Produkty Bateria ProduktyTHX Certification THX CertificationSupports Multiple Digital Devices Main FeaturesPerfect for Any Location Contents Conventions in this manual Check the AccessoriesOptional Accessories About this ManualP26 Controls and featuresFront Side/Left Side Rear Side/Top Side/Right SideBottom Surface To adjust brightness P42 To display test pattern Controls and featuresRemote Control To turn off the power To control lens P26When reflecting off a screen How to Use the Remote controlEffective Range of Remote Control Unit When directing the remote control toward this unitPreparation Selecting Connecting DevicesThis unit ConnectingConnecting via Video Cable and S-Video Cable Connecting via Component Video CableThis unit ConnectingConnecting via Hdmi Cable Connecting via HDMI-DVI Conversion CableThis unit DVD player for European market Connecting via SCART-RCA CableConnecting via RGB Video Cable RGB video output terminalsThis unit Screen Connecting via PC CableConnecting via Trigger Cable Set Angle Installing the Projector and ScreenShift Adjustment Installing the projector and screenLens Installing the Projector ScreenScreen Size and Projection Distance Projecting Image You can hide the image temporarily Turn off the powerAbout Cool Down mode Focus Zoom ShiftInput Image Convenient Features during ProjectionSetting the Screen Size Masking the Surrounding Area of an ImageTo end Mask the imageSelect Input Signal AspectVideo Setting MenuProcedures for Menu Operation Display the setting menuPicture Adjust Setting MenuColor Temp Setting MenuPicture Adjust Color Temp Gamma Picture Adjust GammaLens Aperture ResetAdvanced Comp Input Signal HdmiInput Signal Comp Input Signal Aspect Video Input Signal Video/S-VideoInput Signal PC Input Signal Picture PositionInput Signal Film Mode Input Signal Aspect ComputerInput Signal Over Scan Input Signal MaskInstallation Keystone Installation Lens ControlInstallation Pixel Adjust Installation Installation StyleDisplay Setup Line Display Display Setup Back ColorDisplay Setup Menu Position Display Setup Menu DisplayFunction Test Pattern Display Setup LanguageFunction Lamp Power Function TriggerHigh Altitude Mode Function Off TimerFunction High Altitude Mode Off TimerOther items can also be adjusted To end Changing the Initial Setting Picture ModeSelect picture mode Adjust picture qualityRegister the setting Registering User-defined Picture ModeSelect the picture mode Registering User-defined Picture Mode from the MenuTroubleshooting TroubleshootingAre batteries installed correctly? Is the setup of Control with HdmiIs the image correctly adjusted? Has setting been performed forWhat to Do When these Messages Are Displayed Time Frequency Actions to Be Taken for Warning ModeIndicator Blinking Interval No. Warning Between Content Pull out the lamp unit Replacing the LampRemove the lamp cover Loosen the screws on the lamp unitTighten the screws with a screwdriver Install the new lamp unitTighten the screws of the new lamp unit Attach the lamp coverReplacing the Lamp Resetting Lamp TimeAfter replacing the lamp, reset the lamp time Reset the lamp time only when you have replaced the lampIf the filter is damaged or too dirty to be cleaned Cleaning and Replacing the FilterClean the filter Reinstall the inner filterRS-232C Interface RS-232C SpecificationsCommand Format End Command and dataCommand Type Data description Binary code Remote control codeRS-232C Interface RS-232C Communication Examples Operating commandType Command Description Reference commandDirt in the air inlets Copyright and CautionAbout Trademarks and Copyright Dirt on the cabinetLocations Air inlets Mounting this UnitCeiling Specifications PC compatible signals Back Surface SpecificationsTop Surface Bottom Surface Front

Related manuals

Manual 61 pages 52.05 Kb