JVC DLA-HD10KSU/E, DLA-HD10KU/E manual Mounting this Unit, Precautions for Ceiling-mount

Page 19

Mounting this Unit

When mounting of this unit is required, do so by removing the 4 feet and make use of the 4 screw holes (M8 nuts) at the bottom of this unit. Allow sufficient space around the air inlets to avoid blocking them.

ENGLISH

Air Inlet

Precautions for Ceiling-mount

● To ceiling-mount this unit, special expertise and techniques are necessary. Be sure to ask your dealer (or a specialist) to perform mounting (to ceilings, etc.).

● Do not mount at places that may be subjected to vibration and shock.

● Depth of the screw holes (screw length) is 30 mm. Use screws shorter than 30 mm but longer than 19 mm.

Otherwise, the screws may damage the internal parts of this unit and cause malfunction.

● Install at a safe place in case this unit or a part of it may drop. If the light-source lamp is broken, small pieces of glass from the mesh of the filter may appear outside this unit.

Image 19

Contents Pour utilisation par le client For Customer useMachine Noise Information Germany only About the installation placeAbout burning-in of the D-ILA device English Power cordHow To Replace The Fuse Safety PrecautionsBenutzerinformationen zur Entsorgung alter Geräte Hinweis Information for Users on Disposal of Old Equip- mentEuropean Union Business users Other Countries outside the European UnionUnião Europeia Unión EuropeaEmpresas Otros países no pertenecientes a la Unión Europea Unione EuropeaYrityskäyttäjät Muut maat Euroopan unionin ulkopuolella Brugerinformation om bortskaffelse af gammelt udstyr BemærkProfessionelle brugere Lande uden for EU Euroopan unioniЕвропейский Союз Viewing Conditions Brightness of Room Maintenance ProceduresStandard for gauging replacement time of components About Burning-in of D-ILA DeviceAccessories ContentsFront Side/Top Surface/Bottom Surface Controls and FeaturesRear Side/Right Side Controls and FeaturesHandling the Control Panel Cover Control Panel Indicators Indicator Description Indicator DisplayIndicator Display on the Top Surface Indicator Display on the Control PanelRemote Control Close the back cover Loading Batteries into the Remote ControlOpen the back cover Load the batteriesPrecautions for Usage Installing the ProjectorPrecautions for Installation Installation EnvironmentMounting this Unit Precautions for Ceiling-mountWhen viewed from the top or bottom Installing the ProjectorProjector and Screen Installation When viewed from the left or rightApproximate Projecting Distance Screen Size and Projection DistanceDLA-HD10KSU/E DLA-HD10KU/ERemove the lens shift cover Lens Shift SettingAdjust the projection screen position Project the image on the screenWhen reflecting off a screen Effective Range of Remote Control UnitWhen directing remote control unit toward this unit Control from external device Connecting to Various DevicesConnecting to Devices Connecting to DevicesConnecting the Power Cord Supplied Removing the lens cap Basic Operation ProceduresTurning on the power Adjusting zoom screen sizeHiding the image temporarily Adjusting focusTurning off the power Precautions During UseMenu Structure Adjustments and Settings Using MenusButton Remote This Unit Function Control Unit Menu Operation ButtonsPress the Menu button Adjustments and Settings Using MenusProcedures for Menu Operation After setting is completed, press the Exit buttonMenu Configuration RC232C bps Power SaveOptions Menu Menu Display Sleep TimeProject image onto the screen Screen MaskingPress the Menu button to end Picture Shift Setting Light-source Lamp and Lamp Usage Time About Lamp ReplacementOWhen the lamp usage time reaches 2010 hours Replacing the LampProcedure for Lamp Replacement Attach the control panel cover Insert the lamp unit until it is fullyTighten the screws of the lamp unit and close the handle Attach the lamp cover and fasten the screwInsert plug into the power outlet Resetting Lamp TimeTo ensure the lamp time has been reset Reinstall the inner filter Cleaning and Replacing the FilterPull out the plug from the power outlet Clean the filterMessage Cause Details What to do when these messages are displayedPlease follow the procedures below About warning indicatorsActions to be taken upon warning indications Troubleshooting Work Symptom Probable Cause Corrective Action Reference RemoteRS-232C Terminal Pin No Signal NameTerminal Description Pin ArrangementRS-232C External Control Communication SpecificationsCommand Format Header Command ParameterTerminal Description External control command tableSpecifications Bottom Side SpecificationsDimensions Unit mm Top FrontMemo DLA-HD10KU/E/DLA-HD10KSU/E

Related manuals

Manual 50 pages 24.34 Kb