JVC DLA-HD10KSU/E manual Effective Range of Remote Control Unit, When reflecting off a screen

Page 23

Effective Range of Remote Control Unit

The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having the transmission signal reflected off a screen.

If the fluorescent lamp is lit, the remote control unit might not function properly.

When reflecting off a screen

Ensure that total of distance A between this unit and screen and distance B between remote control and screen is within 7 m.

As the effect of signals reflected from the remote control unit differ with the type of screen used, operable distance may decrease.

ENGLISH

30°

20°

30°

A

20°

B

+

-

When directing remote control unit toward this unit

When aiming the remote control unit towards the remote sensor on this unit, ensure that the distance to the sensor in front or at the rear of this unit is within 7 m.

If the remote control fails to work properly, move closer to the unit.

Please refer to page 12 on location of the remote sensor at the rear of this unit.

30°

30°

20°

20°

+

-

23

Image 23
Contents Pour utilisation par le client For Customer useAbout burning-in of the D-ILA device About the installation placeMachine Noise Information Germany only English Power cordHow To Replace The Fuse Safety PrecautionsBenutzerinformationen zur Entsorgung alter Geräte Hinweis Information for Users on Disposal of Old Equip- mentEuropean Union Business users Other Countries outside the European UnionUnião Europeia Unión EuropeaEmpresas Otros países no pertenecientes a la Unión Europea Unione EuropeaYrityskäyttäjät Muut maat Euroopan unionin ulkopuolella Brugerinformation om bortskaffelse af gammelt udstyr BemærkProfessionelle brugere Lande uden for EU Euroopan unioniЕвропейский Союз Viewing Conditions Brightness of Room Maintenance ProceduresStandard for gauging replacement time of components About Burning-in of D-ILA DeviceAccessories ContentsFront Side/Top Surface/Bottom Surface Controls and FeaturesHandling the Control Panel Cover Controls and FeaturesRear Side/Right Side Control Panel Indicators Indicator Description Indicator DisplayIndicator Display on the Top Surface Indicator Display on the Control PanelRemote Control Close the back cover Loading Batteries into the Remote ControlOpen the back cover Load the batteriesPrecautions for Usage Installing the ProjectorPrecautions for Installation Installation EnvironmentMounting this Unit Precautions for Ceiling-mountWhen viewed from the top or bottom Installing the ProjectorProjector and Screen Installation When viewed from the left or rightApproximate Projecting Distance Screen Size and Projection DistanceDLA-HD10KSU/E DLA-HD10KU/ERemove the lens shift cover Lens Shift SettingAdjust the projection screen position Project the image on the screenWhen directing remote control unit toward this unit Effective Range of Remote Control UnitWhen reflecting off a screen Control from external device Connecting to Various DevicesConnecting to Devices Connecting to DevicesConnecting the Power Cord Supplied Removing the lens cap Basic Operation ProceduresTurning on the power Adjusting zoom screen sizeHiding the image temporarily Adjusting focusTurning off the power Precautions During UseMenu Structure Adjustments and Settings Using MenusButton Remote This Unit Function Control Unit Menu Operation ButtonsPress the Menu button Adjustments and Settings Using MenusProcedures for Menu Operation After setting is completed, press the Exit buttonMenu Configuration RC232C bps Power SaveOptions Menu Menu Display Sleep TimePress the Menu button to end Screen MaskingProject image onto the screen Picture Shift Setting Light-source Lamp and Lamp Usage Time About Lamp ReplacementOWhen the lamp usage time reaches 2010 hours Replacing the LampProcedure for Lamp Replacement Attach the control panel cover Insert the lamp unit until it is fullyTighten the screws of the lamp unit and close the handle Attach the lamp cover and fasten the screwTo ensure the lamp time has been reset Resetting Lamp TimeInsert plug into the power outlet Reinstall the inner filter Cleaning and Replacing the FilterPull out the plug from the power outlet Clean the filterMessage Cause Details What to do when these messages are displayedActions to be taken upon warning indications About warning indicatorsPlease follow the procedures below Troubleshooting Work Symptom Probable Cause Corrective Action Reference RemoteRS-232C Terminal Pin No Signal NameTerminal Description Pin ArrangementRS-232C External Control Communication SpecificationsCommand Format Header Command ParameterTerminal Description External control command tableSpecifications Bottom Side SpecificationsDimensions Unit mm Top FrontMemo DLA-HD10KU/E/DLA-HD10KSU/E
Related manuals
Manual 50 pages 24.34 Kb