JVC DLA-HD10KSU/E, DLA-HD10KU/E manual Control Panel

Control Panel

A B C

ENGLISH

RS232C Rx Tx

MENU

T	+
ZOOM	FOCUS
W	-

OPERATE

EXIT ON

H

OPERATE

OFF

I

HIDE

J

D E F G

A [Rx/Tx] Indicator

This indicator lights up during communication with the computer using the RS-232C terminal. (A Page 15) [Rx] : Lights up when this unit is receiving RS-232C

data.

[Tx] : Lights up when this unit is sending RS-232Cdata.

B [MENU] Button

Press this button to display the menu. Pressing this button when the menu is displayed clears the menu. (A Pages 29, 30)

C [EXIT] Button

Press this button to return to the previous hierarchical menu (for example, to return from submenu to main menu). Pressing this button when the main menu is displayed clears the menu. (A Pages 29, 30)

D [ZOOM T/W] Button

Press this button to change the size of the projected image. (A Page 26)

E [FOCUS +/-] Button

Press this button to adjust focus of the projected image. (A Page 27)

F Cursor [J / K / H / I] Buttons

Use these buttons when adjusting the menu items. (A Pages 29, 30)

G [ENTER] Button

Press this button to show the next hierarchical menu (for example, to enter submenu from main menu). It is also used when AENTERB is displayed against a selection item on the menu screen. (A Pages 29, 30)

H [OPERATE ON] Button

When this unit is in the standby mode, pressing this button for more than 1 second will turn the unit on and cause the [OPERATE] indicator to light up.

(A Page 26)

I [OPERATE OFF] Button

When this unit is operating (projecting), pressing this button for more than 1 second switches the unit to the cool down mode, which will automatically switch to the standby mode after about 60 seconds. (A Page 27)

●The [OPERATE OFF] button will not work within approximately 1 minute after the light source has been turned on. Start operation only after 1 minute’s time.

J [HIDE] Button

Use this button to temporarily clear the video image. Press again to resume. (A Page 27)

13