JVC DLA-HD10KU/E, DLA-HD10KSU/E manual Connecting to Various Devices, Connecting to Devices

Page 24

Connecting to Various Devices

Connecting to Devices

Before connection, be sure to turn off both the projector and the device to be connected.

●Read the manual that is supplied with the device to be connected thoroughly.

Connecting to Devices

●Depending on your DVI-D cable, the signal may attenuate and the image become unstable.

●When using a DVI-D cable longer than 5 m, the use of a split system or optical fiber cable is recommended.

●Video signals that can be input to this unit are 1080/50p and 1080/60p signals for DVI-D.

Rear side of this unit

RVICE

RS-232C

DVI

Connect to a [DVI] terminal

DVI OUTPUT

DVI-D cable

Control from external device

It is possible to control this unit by connecting a computer to the [RS-232C] terminal at the rear of this unit.

●Please request a connection cable from us if needed.

●For details, please consult your authorized dealer.

Rear side of this unit

RVICE	RS-232C	DVI

RS-232C Connection Cable

(Sold Separately) (Cross Cable)

Image 24

Contents For Customer use Pour utilisation par le clientAbout the installation place Machine Noise Information Germany onlyAbout burning-in of the D-ILA device Power cord EnglishSafety Precautions How To Replace The FuseInformation for Users on Disposal of Old Equip- ment European UnionBusiness users Other Countries outside the European Union Benutzerinformationen zur Entsorgung alter Geräte HinweisUnión Europea Empresas Otros países no pertenecientes a la Unión EuropeaUnione Europea União EuropeiaBrugerinformation om bortskaffelse af gammelt udstyr Bemærk Professionelle brugere Lande uden for EUEuroopan unioni Yrityskäyttäjät Muut maat Euroopan unionin ulkopuolellaЕвропейский Союз Maintenance Procedures Standard for gauging replacement time of componentsAbout Burning-in of D-ILA Device Viewing Conditions Brightness of RoomContents AccessoriesControls and Features Front Side/Top Surface/Bottom SurfaceControls and Features Rear Side/Right SideHandling the Control Panel Cover Control Panel Indicators Indicator Display Indicator Display on the Top SurfaceIndicator Display on the Control Panel Indicator DescriptionRemote Control Loading Batteries into the Remote Control Open the back coverLoad the batteries Close the back coverInstalling the Projector Precautions for InstallationInstallation Environment Precautions for UsagePrecautions for Ceiling-mount Mounting this UnitInstalling the Projector Projector and Screen InstallationWhen viewed from the left or right When viewed from the top or bottomScreen Size and Projection Distance DLA-HD10KSU/EDLA-HD10KU/E Approximate Projecting DistanceLens Shift Setting Adjust the projection screen positionProject the image on the screen Remove the lens shift coverEffective Range of Remote Control Unit When reflecting off a screenWhen directing remote control unit toward this unit Connecting to Various Devices Connecting to DevicesConnecting to Devices Control from external deviceConnecting the Power Cord Supplied Basic Operation Procedures Turning on the powerAdjusting zoom screen size Removing the lens capAdjusting focus Turning off the powerPrecautions During Use Hiding the image temporarilyAdjustments and Settings Using Menus Menu StructureMenu Operation Buttons Button Remote This Unit Function Control UnitAdjustments and Settings Using Menus Procedures for Menu OperationAfter setting is completed, press the Exit button Press the Menu buttonMenu Configuration Power Save Options Menu Menu DisplaySleep Time RC232C bpsScreen Masking Project image onto the screenPress the Menu button to end Picture Shift Setting About Lamp Replacement OWhen the lamp usage time reaches 2010 hoursReplacing the Lamp Light-source Lamp and Lamp Usage TimeProcedure for Lamp Replacement Insert the lamp unit until it is fully Tighten the screws of the lamp unit and close the handleAttach the lamp cover and fasten the screw Attach the control panel coverResetting Lamp Time Insert plug into the power outletTo ensure the lamp time has been reset Cleaning and Replacing the Filter Pull out the plug from the power outletClean the filter Reinstall the inner filterWhat to do when these messages are displayed Message Cause DetailsAbout warning indicators Please follow the procedures belowActions to be taken upon warning indications Troubleshooting Symptom Probable Cause Corrective Action Reference Remote WorkPin No Signal Name Terminal DescriptionPin Arrangement RS-232C TerminalCommunication Specifications Command FormatHeader Command Parameter RS-232C External ControlExternal control command table Terminal DescriptionSpecifications Specifications Dimensions Unit mm TopFront Bottom SideMemo DLA-HD10KU/E/DLA-HD10KSU/E

Related manuals

Manual 50 pages 24.34 Kb