McIntosh MDLP2 owner manual Projector and 43 Screen Mounting Location

Page 12

Projector and 4:3 Screen Mounting Location

The illustrations below together with the charts on the adjacent page, will help to assure the correct mounting locations for both the projector and the screen.

Projector mounted from the ceiling

Ceiling

Top of Screen

Vertical

Screen

Height

Bottom of Screen

Vertical Center of Screen

Distance (Minimum-Maximum) between the Screen and the Projector Lens

Acceptable

Projector

Mounting

Height

CAUTION:

The MDLP2 Video Projector weight is 40 pounds (18.14 ki- lograms). When mounting the projector to a building struc- ture it is important to follow all of the local building/con- stuction codes. Not evaluated for Wall or Ceiling Mounting.

Vertical

Screen

Height

Top of Screen

Projector placed above the floor

Distance (Minimum-Maximum) between the Screen and the Projector Lens

Vertical Center of Screen

Bottom of Screen Floor

Acceptable

Projector

Mounting

Height

12

Image 12
Contents Video Projector Important Safety Instructions Additional Safety Instructions Safety InstructionsCustomer Service Table of ContentsThank You Please Take a MomentGeneral Information Connector and Cable Information Power Control ConnectorsData Port Connectors RS232 DB9 Connector Pin LayoutPerformance Features Dimensions Front View of the MDLP2 Rear View of the MDLP2Side View of the MDLP2 Installation Installation Overview VentilationProjector and 169 Screen Mounting Location Projector mounted from the ceilingProjector placed above the floor Installation, con’t Projector and 43 Screen Mounting Location Installation, con’t Initial Setup 3CREEN Rear Panel Connections and Switch How to Connect the MDLP2 Power Control ConnectionsAC Power Cord Connections Data Control ConnectionsRemote Control Push-Buttons How to use the Remote Control Front Panel Push-buttons, Indicators and Control Default Settings Menu Function SettingHow to Operate the MDLP2 PowerImage Adjustments and Setting changes Source SelectionKeystone0 Picture Adjust Menu Picture Mode SelectionHow to Operate the MDLP2, con’t Fine Menu 1 AdjustFine Menu 2 Adjust Input Signal Resolution SelectionRGB/HD Adjust Aspect Ratio OptionsHdmi Menu Adjust Display Menu AdjustOSD/Blanking Config. Settings Reset of Microprocessors Specifications Optical Specifications Electrical SpecificationsGeneral Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY