McIntosh MDLP2 owner manual Remote Control Push-Buttons

Remote Control Push-Buttons

Selects which component, either the VP1000 Processor or the MDLP2 Projector, the remote control com- mands are sent to

LED illuminates during the time a remote command is sent to the MDLP2

Used to change the Color Temperature settings

Press to adjust the	Used to change the Lens Iris
selected function
	opening size
Used to change the
Gamma settings	Press to activate the various On-
Press to recall various	Screen Menus, press a second time
	to deactivate the Menus
On-Screen Information,
press a second time to	Used to navigate up, down, to
deactivate the Menus
Press to change the Aspect	the left and to the right through
	the various menus. Also used
Ratio of the video image	to select the desired function or
Press to select one of three	option
predefined picture settings	Press to select the desired Screen
or select one of nine user
	Blanking Setting from Memory
defined picture settings
	Locations 1-3 or switch Off the
Changes the film frame pro-	Blanking Function
cessing from Auto to Off	Press to Power ON or
Activates the OnScreen	OFF the MDLP2
Crosshatch Test Pattern	Press to select the desired video
	source, Component 1, Compo-
	nent 2, HDMI 1 or HDMI 2

Note: Push-buttons whose function is not identified above are for use with other McIntosh Components

18