Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown on this page, with the protective cover installed on the projector lens. Failure to do this will result in shipping damage.
Use the original shipping carton and interior parts only if they are all in good serviceable condition. If a shipping carton or any of the interior part(s) are needed, please call or write the Customer Service Department of McIntosh Laboratory. Refer to page 4. Please see the Part List for the correct part numbers.
CAUTION: To prevent possible damage to the Projec- tor Lens Assembly, DO NOT at any time attempt to LIFT, CARRY or
Quantity | Part Number | Description |
1 | 034374 | Shipping carton complete |
Shipping
Carton
Top
Foam
Pad
Top
Protective
Lens Cover
Foam
Pad
Bottom
Shipping
Carton
Bottom
31