Elmo HV-7100SX instruction manual Analog RGB Signal

■Connection to the analog RGB-out terminal

Connect the analog RGB-out terminal [OUTPUT·RGBOUT] to the equipment having an analog RGB-in terminal with the analog RGB cable (attached) or a connection cable available on the market.

At this time, the position of the display may be deviated from the center. If deviated, manually adjust the horizontal and vertical positions on the connected equipment side.

Also, vertical stripes may appear on the screen of the LCD projector. That can be alleviated by manually adjusting the dot clock frequency on the projector side.

LCD projector

CRT Monitor

or

■Connection to the composite video-out terminal

Connect the composite video output terminal [VIDEO] and the audio output terminal [AUDIO] (RCA pin) with the video/audio cable with RCA pin plug as attached or available on market.

TV Monitor

■Connection to the S video-out terminal

Use the S video terminal [S-VIDEO](mini-DIN4P) and the S-video cable as attached or available on market.

TV Monitor

Hold the cable plug when connecting or disconnecting the cables.

Analog RGB Signal

■Signal allocation

5	4	3	2	1	Video signal :	Analog 0.7V(p-p) 75Ω terminated
10	9	8	7	6	Horizontal synchronized signal : TTL level (positive/negative polarity)
15 14 13 12 11					Vertical synchronized signal :	TTL level (positive/negative polarity)

DSUB 15P shrink terminal (Female)

■Pin assignment

Pin No.	Name	Pin No.	Name	Pin No.	Name
1	Video signal (Red)	6	GND (Red)	11	GND
2	Video signal (Green)	7	GND (Green)	12	N.C
3	Video signal (Blue)	8	GND (Blue)	13	Horizontal synchronized signal
4	N.C	9	N.C	14	Vertical synchronized signal
5	GND	10	GND	15	N.C

1

2

3

4

5

6

7

8

9

10

11

16