Elmo HV-7100SX instruction manual Auto Focus

1

2

3

Focus

Front operation panel						Wireless remote control
						PAUSE		LIVE
								MEMORY
MONITOR OUTPUT RGB1	PAUSE	OPEN IRIS CLOSE		WHITE		2x
			AUTO/MANUAL	BALANCE	TELE
MAIN						SET PRESET CALL		SET IMAGE CALL
					ZOOM	AF
RGB2	F.A.M.	IMAGE ROTATION POSI / NEGA	LAMP	CONTRAST
					WIDE	POSI/NEGA COLOR/B&W		UPPER LAMP BASE
						MAIN	MONITOR	RGB1	RGB2
			UPPER / BASE / OFF				OUTPUT
						TELE ZOOM WIDE		NEAR FOCUS FAR
						NORMAL	OPEN	CLOSE	AF
							IRIS

4 Adjust the focus of the object.

■Auto Focus

5	Press the auto focus button [AF] on the front panel or
	the wireless remote control, to activate the auto focus.
	While the auto-focus is in operation, the indicator
6	lamp on the front panel blinks until the object is
	brought into focus.
	This product features a one-push auto focus function.
	Once focusing is completed, the auto focus function is
7	released, and the focused position maintains
	unchanged (FOCUSFREE).
	The objects listed below may not be brought into
	focus in the auto focus mode. In these cases, use
8	the manual focus mode.
	• Objects bearing little contrast

•Objects with fine repeated patterns, such as lateral stripes and cross stripes

•Objects glittering or reflecting strong light

9	• Objects with bright background, or excessive
	contrast
	• The whole image is dark.
	• Objects located near and far at the same time
10	• Objects in motion
	The auto focus function will be canceled if the manual
	focus button [FOCUS.NEAR] or [FOCUS.FAR] on
	the wireless remote control is pressed.

Front operation panel

WHITE

BALANCE TELE

ZOOM AF

ONTRAST WIDE

Wireless remote control

TELE	WIDE	NEAR FOCUS FAR
NORMAL	OPEN	CLOSE	AF

IRIS

11	The auto focus function works up to a height of
	approx. 10cm (3.9 in) above the stage surface
	w h e n t h e z o o m b u t t o n [ T E L E ] i s s e t t o t h e
	maximum.

31