Texas Instruments TSC2007EVM manual EVM Overview, Features, Introduction, Analog Interface

Page 2

www.ti.com

EVM Overview

1 EVM Overview

1.1Features

Full-featured evaluation board for the TSC2007 4-wire resistive touch screen controller (TSC).

Modular design for use with a variety of DSP and microcontroller interface boards.

The TSC2007EVM-PDK is a complete evaluation kit, which includes a USB-based motherboard and evaluation software for use with a personal computer running Microsoft Windows™ operating systems.

1.2Introduction

The TSC2007EVM is in the Texas Instruments modular EVM form factor, which allows direct evaluation of the performance and operating characteristics of the TSC2007, and eases software development and system prototyping. This EVM is compatible with the 5-6K Interface Evaluation Module (SLAU104) from Texas Instruments and additional third-party boards such as the NI Speedy-33™ from National Instruments Corporation. (www.ni.com)

The TSC2007EVM-PDK is a complete evaluation/demonstration kit, which includes a USB-based motherboard called the USB-MODEVM interface board and evaluation software for use with a personal computer running Microsoft Windows operating systems.

2Analog Interface

For maximum flexibility, the TSC2007EVM is designed for easy interfacing to multiple analog sources. Samtec part numbers SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin, dual-row header/socket combination at J1. This header/socket provides access to the analog input pins of the TSC. Consult Samtec at www.samtec.com, or call 1-800-SAMTEC-9 for a variety of mating connector options.

 

 

Table 2. Analog Interface Pinout

PIN NUMBER

SIGNAL

DESCRIPTION

J1.2

X+

Touch screen X+ electrode

J1.4

X-

Touch screen X- electrode

J1.6

Y+

Touch screen Y+ electrode

J1.8

Y-

Touch screen Y- electrode

J1.10

Unused

 

J1.12

AUX

Auxiliary input, 0 V to VREF

J1.14

Unused

 

J1.16

Unused

 

J1.18

Unused

 

J1.20

Unused

 

J1.15

Unused

 

J1.1-J1.19 (odd)

AGND

Analog ground connections (except J1.15)

NI Speedy-33 is a trademark of Hyperception, Inc.

I2C is a trademark of Koninklijke Philips Electronics N.V., The Netherlands.

Windows is a trademark of Microsoft Corporation.

SPI is a trademark of Motorola, Inc.

2

TSC2007EVM and TSC2007EVM-PDK User's Guide

SLAU199 –March 2007

Submit Documentation Feedback

Image 2
Contents SN74LVC125A EVM-Compatible Device Data SheetsDevice Literature Number SN74LVC1G07EVM Overview FeaturesPIN Number Signal Description IntroductionPower Supply Pinout Power SuppliesTSC Power Power Selection Options JMP1Stand-Alone Operation USB-MODEVM Interface PowerDefault Jumper Locations Analog InputTSC2007EVM-PDK Block Diagram Kit OperationPenirq AUX Quick StartTSC2007EVM SDA SCL SPI, I2CDefault Software Screen Program Description Configuration PanelUSB-MODEVM Interface Board Touch Screen Functions PanelTSC2007EVM Bill of Materials EVM Bill of MaterialsDatalogging USB-MODEVM Bill of Materials TSC2007EVM Schematic USB-MODEVM SchematicTi a USB-MODEVM Interface Revision HistoryHIGH-PERFORMANCE Analog Division Evaluation BOARD/KIT Important Notice FCC WarningDSP Rfid