Texas Instruments TSC2007EVM-PDK manual Default Software Screen

Page 7

www.ti.com

Kit Operation

Place the CD-ROM into your PC CD-ROM drive. Locate the Setup program on the disk, and run it. The Setup program will install the TSC2007 Evaluation software on your PC.

Accept the license agreement, and continue the installation.

When the installation completes, click Finish on the TSC2007EVM installer window. You may be prompted to restart your computer.

When installation is complete, attach a USB cable from your PC to the USB-MODEVM interface board. As configured at the factory, the board is powered from the USB interface; so, the power indicator LEDs on the USB-MODEVM should light. Once this occurs, launch the TSC2007 evaluation software on your PC. It is suggested that users read the readme_install.txt file for up-to-date, step-by-step instructions.

The software should automatically find the TSC2007EVM, and a screen similar to the one shown in Figure 2 should appear.

Figure 2. Default Software Screen

In order to use the touch screen features, a user needs to connect a 4-wire resistive touch screen to J1 of the TSC2007EVM, as described previously.

SLAU199 –March 2007

TSC2007EVM and TSC2007EVM-PDK User's Guide

7

Submit Documentation Feedback

Image 7
Contents SN74LVC1G07 EVM-Compatible Device Data SheetsDevice Literature Number SN74LVC125AIntroduction FeaturesPIN Number Signal Description EVM OverviewPower Selection Options JMP1 Power SuppliesTSC Power Power Supply PinoutAnalog Input USB-MODEVM Interface PowerDefault Jumper Locations Stand-Alone OperationKit Operation TSC2007EVM-PDK Block DiagramSPI, I2C Quick StartTSC2007EVM SDA SCL Penirq AUXDefault Software Screen Touch Screen Functions Panel Configuration PanelUSB-MODEVM Interface Board Program DescriptionDatalogging EVM Bill of MaterialsTSC2007EVM Bill of Materials USB-MODEVM Bill of Materials USB-MODEVM Schematic TSC2007EVM SchematicTi a Revision History USB-MODEVM InterfaceHIGH-PERFORMANCE Analog Division FCC Warning Evaluation BOARD/KIT Important NoticeRfid DSP