Runco SP-60xa, SP-42xa, SP-50xa manual Screen

Page 48

Operation

COLOR CHART

RED

:

+30

YELLOW

:

+30

GREEN

:

+30

CYAN

:

+30

BLUE

:

+30

MAGENTA

:

+30

C. CHART RESET

 

 

RETURN

 

 

 

 

 

SET ENTER

MENU

EXIT

 

 

 

Color Chart (Installer Adjust mode): Select Color Chart from the Picture menu to

adjust the color density for each of the six primary colors: red, yellow, green, cyan, blue and magenta. Changing these settings for a primary color alters the hue of that color and affects the gamut (range) of possible colors. For example, changing the value for red moves the color closer to either yellow or magenta, which in turn affects all displayed colors having a red component.

To reset the color gamut settings to the factory default values, select C. Chart Reset. Then, press to highlight YES and press SET.

Select Return to exit the Color Chart menu.

Gamma (Installer Adjust mode): The Gamma control determines how gray shades are displayed between minimum input (black) and maximum input (white) for all signals. A good gamma setting helps to optimize blacks and whites while ensuring smooth transitions for the “in-between” values utilized in other grays.

Unlike brightness and contrast controls, Gamma allows you to lighten or darken the overall tone of your images without changing the extremes. All images will be more vibrant while still showing good detail in dark areas.

The default Gamma setting of 2.2 is appropriate for most typical home theater environments.

Factory: To reset all picture quality settings for the current input to the default, installer-adjusted values (or factory defaults, if in Installer Adjust mode), select Factory from the Picture menu. Then, press to highlight YES and press SET.

Screen ➤

CINEMAWALL

 

 

 

INPUT 1

PICTURE

SCREEN

SET-UP

OPTION

IMAGE POSITION

:

0/

0

 

FREQ. ADJ.

:

0

 

 

PHASE ADJ.

:

0

 

 

IMAGE RESET

 

 

 

 

SET

ENTER

 

 

MENU

EXIT

INSTALLER ADJUST

 

 

 

INPUT 1

PICTURE

SCREEN

SET-UP

OPTION

H SHIFT

:

+128

 

 

V SHIFT

 

:

+128

 

 

FREQ. ADJ.

:

0

 

 

PHASE ADJ.

:

0

 

 

H SIZE

 

:

0

 

 

V SIZE

 

:

0

 

 

IMAGE RESET

 

 

 

 

SET

ENTER

 

MENU

EXIT

Image Position: Use the up- or down-arrow buttons ( , ) to highlight Image

Position. Then, press SET and use the left- and right-arrow buttons ( , ) to shift the image horizontally; use the up- or down-arrow buttons ( , ) to shift the image vertically.

VShift (Installer Adjust mode): Use the up- or down-arrow buttons ( , ) to highlight V Shift. Then, press SET and use the right-arrow button ( ) to shift the image up; use the left-arrow button ( ) to shift the image down.

HShift (Installer Adjust mode): Use the up- or down-arrow buttons ( , ) to highlight H Shift. Then, press SET and use the right-arrow button ( ) to shift the image to the right; use the left-arrow button ( ) to shift the image to the left.

Frequency Adjust (Input 1 only): Use the up- or down-arrow buttons ( , ) to highlight Freq. Adj. Then, press SET. The Frequency Adjust control adjusts the CinemaWall’s internal clock frequency in small increments to match that of the incoming signal. Use it to reduce or eliminate letter breakup, flickering or other “noise” in a computer screen image.

Phase Adjust (Input 1 only): Use the up- or down-arrow buttons ( , ) to highlight Phase Adj. Then, press SET. Use the Phase Adjust control to correct color misalignment or flickering text in a computer screen image.

Frequency Adjust and Phase Adjust are adjustable only when Auto

Note Setup Mode (in the Option menu, described later in this section) is set to OFF.

38

Runco CinemaWall SP Series Owner’s Operating Manual

Page 47 Page 49
Image 48
Page 47 Page 49
Contents SP-42 / SP-42xa SP-50 / SP-50xa SP-60 / SP-60xa Page Three Year Limited Warranty For Plasma DisplaysRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Safety Precautions Table of Contents Maintenance and Troubleshooting SpecificationsOperation Serial CommunicationsList of Figures List of Figures Introduction About This ManualUsing This Manual If you need Turn toDescription, Features and Benefits Key Features and BenefitsOptional Accessories Controls and Indicators Controls and FunctionsCinemaWall at a Glance Display Stand Connectors SP-42, SP-50 and SP-60 respectivelySP-50 Connector Panel Combination IN/OUT CinemaWall Remote Control Main Power SwitchSET Button Controls and Functions Installation Remote ControlOther surfaces Quick Setup Step Procedure For Details, refer toInstallation ConsiderationsAmbient Light VentilationInstallation Connections to the CinemaWall Video ConnectionsStandby mode Analog RGB OUT Input 1 ConnectionComputer/Video Signal Compatibility on Composite or S-Video Input 3 ConnectionComponent Video Input 4 Connection Audio Connections Attaching the Small Ferrite Cores to Audio Cables11. Audio Output Connection RS-232 Controller ConnectionInstallation Turning on the Power OperationChanging the OSD Language Selecting an Input Source Viewing Input Signal Information Setting the Computer Display PropertiesChanging the Aspect Ratio Aspect Ratio Settings Aspect Ratio DescriptionImage within PIX by PIXUsing the On-Screen Menus Installer Adjust menu is intended for use by authorizedTrained service personnel only CinemaWall OSD Menu Structure Main Menu PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Screen Power Set-UpOFF DVI Setup Language Refer to Changing the OSD Language on OptionScreen Maint. on Option Installer Adjust Mode Installer ADJ InputFAN Speed Auto ISF CCC color mode is pre-set to approximately 3,200K Seamless Switch is not available when using PIP This action is not undoable. Proceed with cautionUsing Picture-In-Picture PIP To use PIP, press the Split buttonSwapping the Main PIP WindowsEnlarging One Part of the Screen Viewing an Enlarged Area of the DisplayOperation Maintenance and Troubleshooting CleaningTroubleshooting Tips Cleaning the Display Panel Body and Remote ControlOUT of Range Signal NG Thermal AlertShut Down FAN FailureRS-232 Connection and Port Configuration Serial Command SyntaxSerial Communications ExampleCommand Value Range Description Minimum MaximumInput Select Note Aspect RatioVideo AudioPicture-in-Picture PIP MSTS08 MSTS09MSTS10 SET-UP Menu Commands Sets 2-screen operation to 2 ScreenSide-by-side, full height main screen On leftLOW HighOption Menu Commands AverageAuto Picture Menu Commands Installer Adjust Mode Screen Menu Commands Installer Adjust Mode SET-UP Menu Commands Installer Adjust ModeOption Menu Commands Installer Adjust Mode FMKS00 FMKS02FMKS03 FMKS044F 53 44 53 30 Sets OSD Display to OFF Minimum Maximum Adjustment Commands DW1DWF UPFSpecifications CinemaWall SpecificationsSpecifications are subject to change without notice Date of delivery to the end userDimensions CinemaWallCinemaWall Model SP-50 Dimensions with Optional Table Stand CinemaWall Model SP-60 Dimensions with Optional Table Stand Computer/Video Signal Compatibility Input Refresh Rate ResolutionRemarks Horiz56.0 45.1 Specifications Page Runco CL-810 Owner’s Operating Manual

SP-50xa, SP-60xa, SP-42xa specifications

Runco has long been recognized for its high-performance projection technologies, and the SP series, consisting of the SP-42xa, SP-50xa, and SP-60xa models, exemplifies this legacy. These projectors are designed for the discriminating home theater enthusiast who demands top-tier image quality, versatility, and innovative features.

The SP-42xa, with its 42-inch screen size, sets the stage for an immersive viewing experience. It boasts a native resolution of 1080p, delivering vibrant colors and extraordinary detail. This projector employs DLP technology, which enhances sharpness and clarity while minimizing motion blur. One notable feature of the SP-42xa is its Intelligent Lens System, which automatically adjusts the lens position to optimize the image based on the content being displayed.

The SP-50xa expands the capabilities with a larger 50-inch screen, perfect for medium-sized home theaters. It incorporates advanced color processing technology, which enhances color accuracy and brightness, providing a stunning visual experience for films and gaming. Additionally, the SP-50xa supports multiple aspect ratios, allowing users to enjoy content without letterboxing or cropping. Its built-in calibration settings facilitate precise adjustments suited to various lighting conditions, ensuring optimal performance in any environment.

The SP-60xa represents the pinnacle of the series with its impressive 60-inch display. This model features Runco's proprietary Vivix processing technology, which significantly enhances contrast and color depth. The SP-60xa provides support for high dynamic range (HDR), enabling deeper blacks and brighter highlights, which translates to a more lifelike picture. Furthermore, its CinemaScope aspect ratio capability offers an immersive cinematic experience, bridging the gap between home viewing and the theater.

All three models are equipped with extensive connectivity options, including HDMI and component inputs, making them compatible with a wide range of audio and video sources. User-friendly interfaces and remote controls simplify operation, allowing seamless integration with home automation systems.

In summary, the Runco SP-42xa, SP-50xa, and SP-60xa projectors collectively epitomize advanced projection technology combined with user-friendly features. With their focus on superior image quality, innovative adjustments, and versatility, these models are perfect for anyone seeking a premium home theater experience. Whether for movie nights or gaming marathons, the Runco SP series delivers an unparalleled visual feast that captivates and entertains.
Top Page Image Contents