Runco CW-42i manual AUDIO1, AUDIO2, AUDIO3, External Control

Page 11

Part Names and Functions

AAC IN

Connect the included power cord here.

BConnect speakers (not available from Runco) here. Maintain the correct polarity.

CVIDEO 1,2,3 (BNC, RCA, S-Video)

Connect VCR’s, DVD’s or Video Cameras, etc here. VIDEO1 can be used for INPUT or OUTPUT.

DAUDIO1, AUDIO2, AUDIO3

These are audio input terminals. The input is selectable. Set which video image to distribute them from the audio menu screen.

EDVD1 / HD1

Connect DVD’s, High Definition or Laser Disks, etc here.

» Rear View / Terminal Board

FRGB2 / DVD2 / HD2

RGB2: Connect an analog RGB signal and the synchronization signal.

DVD2 / HD2: Connect DVD’s, High Definition sources, Laser Discs, etc. here. This input can be set for use with an RGB or Component source.

GRGB1 (mini D-Sub 15pin)

Connect an analog RGB signal from a computer, etc. here. This input can be used for Input or Output.

HRGB3 (DVI 24pin)

Connect a digital signal (TMDS) from a source with a DVI output.

IEXTERNAL CONTROL

This terminal is used when operating and controlling the monitor externally by RS-232.

C

E

F

G

H

I

VIDEO

 

1

 

3

2

AUDIO 1

R

L

(MONO)

 

DVD1/HD1

 

 

Y

 

Cb/Pb

 

Cr/Pr

AUDIO 2

 

L

R

(MONO)

 

DVD2/HD2

 

RGB2

 

R

 

G

Y

B

Cb/Pb

HD

 

VD

 

RGB1

 

 

D-SUB

AUDIO 3

 

L

R

(MONO)

 

DVD3/HD3

 

RGB3

 

 

DVI

D-SUB

EXTERNAL CONTROL

Rear View / Terminal Board

D

AC IN

RIGHT

LEFT

SPEAKERS MUST

 

 

HAVE MORE THAN

 

 

7WATT RATING

 

 

IMPEDANCE 6 OHM

AB

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CW-42i Page Table of Contents Options » The features you’ll enjoy includeContents of the package IntroductionRisk of Electric Shock Do not Open » Precautions» Warnings and Safety Precautions Important InformationRecommendations to avoid or minimize phosphor burn-in » Plasma monitor cleaning procedure» To avoid damage and prolong operating life To Avoid Image BURN-IN Limited WarrantyWhat is Covered Under the Terms of this Limited Warranty RIGHTS, Limits and Exclusions Effective Warranty DateImportant Warranty Registration Contact a Runco Authorized Service Center to Obtain ServiceVentilation Requirements for enclosure mounting HOW to Attach Options to the Plasma MonitorMenu PowerPart Names and Functions Input Select / ExitExternal Control AUDIO1, AUDIO2, AUDIO3Aspect ON/OFFLight ExitDVD 1 / HD1 Overall Functional DescriptionDigital Inputs » Plasma Connection Examples Installation» Connecting Your DVD Player » Connecting Your PC or Macintosh Computer» Connecting Your VCR or Laser Disc Player » Pin Assignments for 15-pin RGB analog » Pin Configuration of the RGB3 Connector DVI ConnectorBasic Operations Aspect Ratio Controls STD 43 Anamphc LTR BOX » Wide Screen Operation with Computer SignalsSTD 43 mode 43 or Sxga Within 3 seconds» Menu Operations OSD on Screen Display ControlsOSD On Screen Display Controls Language Adjusting the computer image » Picture Adjust Menu Adjusting the pictureUse the and buttons to adjust the contrast Picture adjustment screenTypes of picture modes Once the adjustment is completedTo set to CUSTOM1 Normal ISF DAY ISF NIT CUSTOM1 FilmTypes of noise reduction Once the setting is completedReducing noise in the picture OFF VID NR1 VID NR2 VID NR3Setting the color temperature Setting the KelvinB Gain Adjusting the Color to the Desired LevelAdjust the white balance using the and buttons Adjusting the white balanceAuto Still Motion Diffuse Making the Dither AdjustmentsGamma settings Changing the GammaColor Chart settings Adjusting the ColorsDither settings Audio To continue adjusting the audio ... Repeat from stepTo set the Audio INPUT1 to VIDEO1 Setting the allocation of the audio connectorsSTD 43 ↔ Anamphc ↔ Vrtwide ↔ LTR BOX » Image Options MenuRestoring the factory defaults settings When Computer is offAdjusting the Computer Adjusting the position of the imageOn ↔ OFF » Install 1 Menu Setting the on-screen menuTo set the Display OSD to OFF RGB ↔ Comp Setting the BNC connectorsTo set the BNC Input mode to Comp BNC Input settingsAuto Still Motion RESIZE1 RESIZE2 DTV Checking the signal being transmitted to RGB1 terminalSetting a computer image to the correct RGB select screen To set the RGB select mode to AutoRGB Type modes Setting high definition images to the suitable screen sizeTo set the HD Type mode to 1080B 1080B 1035I 1080AOFF on Setting the Input SkipTo set the Input Skip mode to OFF Input Skip settingsUse the and buttons to select ON, then press the Menu button Resetting to the default valuesOFF » Install 2 Menu Setting the Auto Off for computer imagesTo turn the Auto Off function on Setting the picture to suit the movie Power / Standby indicatorPerform Steps 1-2 of PDP PROTECT, then LUM. Setting Luminance SettingDOT Adjust the Orbiter function manuallyOrbiter OFF AUTO1 AUTO2 ManualPerform Steps 1-3 of INVERSE, then Setting the time for InverseInverse Perform Steps 1-2 of PDP PROTECT, thenSpeed Image SweepPerform Steps 1-3 of Image SWEEP, then Soften Setting the Sidebar ADJ. for the sides of the screenTo adjust the Sidebar ADJ Use the and buttons to adjust the Sidebar ADJPerform the following operations Setting the screen size for S1/S2 video inputSetting the signal and black level for DVI signal To set PLUG/PLAY mode to STB/DVDPresent Time » Install 3 Menu Using the timerPerform Steps 1-2 of TIMER, then Function -- Orbiter Inverse White Image Sweep Program TimerDate SATComp → LAST↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ← Setting the Default InputRGB → Last ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ← → RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←Use Buttons to select Control Lock Use Buttons to select Install 3, then pressMenu button. The Install 3 screen appears Enabling/disabling the front panel controlsTo set the Loop OUT to ON... Use Enabling/disabling remote control wireless transmissionTo set the IR Enable to OFF Loop Out SettingALL ID Number SettingTo set the ID number for the remote control To set the ID Number to O2Use this feature to configure a 2×2 or 3×3 video wall Video Wall SettingPosition DividerPerform Steps 1-2 of Video WALL, then Auto ID DISP. ModeUse Buttons to select on Image AdjustOn Delay Power on delay On Delay settingsLUM SET Link LUM SET Link settingsSource Repeat Time RepeatUse the and buttons to select Repeat Time Divider 1 4→ English ↔ Deutsch ↔ Français ← → Italiano ↔ Español ← » Language Menu Setting the language for the menusTo select Deutsch Color System formats » Color System Menu Setting the video signal formatTo select 3.58NTSC Once you have checked the frequency Computer input signals supported by this system Table of Signals SupportedTable of Signals Supported Symptom Checks Remedy TroubleshootingDimensions Specifications Page

CW-42i specifications

The Runco CW-42i is a standout model in the realm of high-definition displays, known for its impressive performance and sleek design. As part of Runco's commitment to offering high-quality visual experiences, the CW-42i integrates advanced technologies tailored for both home theater enthusiasts and design-conscious consumers.

At its core, the Runco CW-42i boasts a stunning 42-inch diagonal screen, providing an optimal viewing experience for various settings, from intimate living rooms to dedicated home theaters. The display utilizes plasma technology, known for its ability to deliver deep blacks and vibrant colors, resulting in a rich and immersive viewing experience. With a native resolution of 1080p, the CW-42i ensures that visuals are sharp and detailed, whether you're watching movies, playing video games, or enjoying television shows.

One of the key features of the Runco CW-42i is its exceptional color accuracy and calibration capabilities. The display incorporates Runco's proprietary color processing technology, enabling it to reproduce colors with remarkable fidelity. Additionally, the CW-42i comes equipped with advanced calibration tools, allowing users to fine-tune their viewing experience to perfection. This level of customization ensures that every image looks as the creators intended, regardless of the content being viewed.

The CW-42i also distinguishes itself with its aesthetic appeal. With a modern and minimalistic design, it seamlessly integrates into any interior décor. The display features a slim profile and can be wall-mounted or placed on a stand, providing flexibility in installations. The bezels are narrow, offering a more immersive viewing area, ensuring that the attention remains on the screen rather than the frame.

In terms of connectivity, the Runco CW-42i is well-equipped to handle a variety of devices. It includes multiple HDMI ports, component inputs, and other essential connections, making it easy to link with Blu-ray players, gaming consoles, and set-top boxes. This versatility is crucial for users looking to build a comprehensive entertainment system.

Lastly, the CW-42i incorporates advanced sound technology, providing a comprehensive audio experience that complements the stunning visuals. Whether paired with an external audio system or used standalone, the display’s sound quality enhances the overall cinematic experience.

In summary, the Runco CW-42i is an exceptional display that combines cutting-edge technologies, versatile connectivity options, and a stylish design. Whether for home entertainment or professional presentations, the CW-42i is engineered to impress with stunning visuals and superior performance.
Top Page Image Contents