Runco CW-42i manual » Image Options Menu, STD 43 ↔ Anamphc ↔ Vrtwide ↔ LTR BOX

Page 32

OSD (On Screen Display) Controls

» IMAGE OPTIONS Menu

The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the and buttons to select “IMAGE OPTIONS”, then press the MENU button. The “IMAGE OPTIONS” screen appears.

Default settings (when RGB/PC is selected).

IMAGE OPTIONS

ASPECT RATIO

:

VRTWIDE

V SHIFT

 

 

 

 

 

 

0

H SHIFT

 

 

 

 

 

0

 

 

 

 

 

 

V-SIZE

 

 

 

 

 

0

 

 

 

 

 

 

H-SIZE

 

 

 

 

 

0

COMPUTER

 

: OFF

FINE PICTURE

 

 

 

 

0

 

 

 

 

 

PICTURE ADJ

 

 

 

 

 

0

SEL.

ADJ.

EXIT RETURN

* The settings on the IMAGE OPTIONS menu are not preset at the factory.

To select a mode ...

Use the and buttons to select a mode. The mode switches as follows when the and buttons are pressed:

STD 4:3 ↔ ANAMPHC ↔ VRTWIDE ↔ LTR BOX

* The mode can also be switched by pressing the “ASPECT” button on the remote control.

2.To adjust the vertical position ...

Use the and buttons to select “V SHIFT”.

 

IMAGE OPTIONS

ASPECT RATIO :

VRTWIDE

V SHIFT

 

0

H SHIFT

 

0

V-SIZE

 

 

0

H-SIZE

 

 

0

SEL.

 

ADJ.

EXIT RETURN

3. Adjust using the

and

buttons.

V SHIFT

0

*If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

To continue making other computer image adjustments...

Repeat from step 2.

4.Once all adjustments are completed...

Press the EXIT button to return to the main menu, To delete the main menu, press the EXIT button once more.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CW-42i Page Table of Contents » The features you’ll enjoy include Contents of the packageIntroduction Options» Precautions » Warnings and Safety PrecautionsImportant Information Risk of Electric Shock Do not OpenRecommendations to avoid or minimize phosphor burn-in » Plasma monitor cleaning procedure» To avoid damage and prolong operating life To Avoid Image BURN-IN Limited WarrantyWhat is Covered Under the Terms of this Limited Warranty Effective Warranty Date Important Warranty RegistrationContact a Runco Authorized Service Center to Obtain Service RIGHTS, Limits and ExclusionsHOW to Attach Options to the Plasma Monitor Ventilation Requirements for enclosure mountingPower Part Names and FunctionsInput Select / Exit MenuAUDIO1, AUDIO2, AUDIO3 External ControlON/OFF LightExit AspectDVD 1 / HD1 Overall Functional DescriptionDigital Inputs Installation » Plasma Connection Examples» Connecting Your DVD Player » Connecting Your PC or Macintosh Computer» Connecting Your VCR or Laser Disc Player » Pin Configuration of the RGB3 Connector DVI Connector » Pin Assignments for 15-pin RGB analogBasic Operations Aspect Ratio Controls » Wide Screen Operation with Computer Signals STD 43 mode 43 or SxgaWithin 3 seconds STD 43 Anamphc LTR BOXOSD on Screen Display Controls » Menu OperationsOSD On Screen Display Controls Language » Picture Adjust Menu Adjusting the picture Use the and buttons to adjust the contrastPicture adjustment screen Adjusting the computer imageOnce the adjustment is completed To set to CUSTOM1Normal ISF DAY ISF NIT CUSTOM1 Film Types of picture modesOnce the setting is completed Reducing noise in the pictureOFF VID NR1 VID NR2 VID NR3 Types of noise reductionSetting the Kelvin Setting the color temperatureAdjusting the Color to the Desired Level Adjust the white balance using the and buttonsAdjusting the white balance B GainMaking the Dither Adjustments Gamma settingsChanging the Gamma Auto Still Motion DiffuseColor Chart settings Adjusting the ColorsDither settings To continue adjusting the audio ... Repeat from step AudioSetting the allocation of the audio connectors To set the Audio INPUT1 to VIDEO1» Image Options Menu STD 43 ↔ Anamphc ↔ Vrtwide ↔ LTR BOXWhen Computer is off Adjusting the ComputerAdjusting the position of the image Restoring the factory defaults settingsOn ↔ OFF » Install 1 Menu Setting the on-screen menuTo set the Display OSD to OFF Setting the BNC connectors To set the BNC Input mode to CompBNC Input settings RGB ↔ CompChecking the signal being transmitted to RGB1 terminal Setting a computer image to the correct RGB select screenTo set the RGB select mode to Auto Auto Still Motion RESIZE1 RESIZE2 DTVSetting high definition images to the suitable screen size To set the HD Type mode to 1080B1080B 1035I 1080A RGB Type modesSetting the Input Skip To set the Input Skip mode to OFFInput Skip settings OFF onResetting to the default values Use the and buttons to select ON, then press the Menu buttonOFF » Install 2 Menu Setting the Auto Off for computer imagesTo turn the Auto Off function on Power / Standby indicator Setting the picture to suit the movieLUM. Setting Luminance Setting Perform Steps 1-2 of PDP PROTECT, thenAdjust the Orbiter function manually OrbiterOFF AUTO1 AUTO2 Manual DOTSetting the time for Inverse InversePerform Steps 1-2 of PDP PROTECT, then Perform Steps 1-3 of INVERSE, thenSpeed Image SweepPerform Steps 1-3 of Image SWEEP, then Setting the Sidebar ADJ. for the sides of the screen To adjust the Sidebar ADJUse the and buttons to adjust the Sidebar ADJ SoftenSetting the screen size for S1/S2 video input Setting the signal and black level for DVI signalTo set PLUG/PLAY mode to STB/DVD Perform the following operationsPresent Time » Install 3 Menu Using the timerPerform Steps 1-2 of TIMER, then Program Timer DateSAT Function -- Orbiter Inverse White Image SweepSetting the Default Input RGB → Last ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ← Comp → LAST↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←Use Buttons to select Install 3, then press Menu button. The Install 3 screen appearsEnabling/disabling the front panel controls Use Buttons to select Control LockEnabling/disabling remote control wireless transmission To set the IR Enable to OFFLoop Out Setting To set the Loop OUT to ON... UseID Number Setting To set the ID number for the remote controlTo set the ID Number to O2 ALLVideo Wall Setting Use this feature to configure a 2×2 or 3×3 video wallPosition DividerPerform Steps 1-2 of Video WALL, then DISP. Mode Auto IDImage Adjust On Delay Power on delayOn Delay settings Use Buttons to select onLUM SET Link settings LUM SET LinkRepeat Time Repeat Use the and buttons to select Repeat TimeDivider 1 4 Source→ English ↔ Deutsch ↔ Français ← → Italiano ↔ Español ← » Language Menu Setting the language for the menusTo select Deutsch Color System formats » Color System Menu Setting the video signal formatTo select 3.58NTSC Once you have checked the frequency Table of Signals Supported Computer input signals supported by this systemTable of Signals Supported Troubleshooting Symptom Checks RemedyDimensions Specifications Page

CW-42i specifications

The Runco CW-42i is a standout model in the realm of high-definition displays, known for its impressive performance and sleek design. As part of Runco's commitment to offering high-quality visual experiences, the CW-42i integrates advanced technologies tailored for both home theater enthusiasts and design-conscious consumers.

At its core, the Runco CW-42i boasts a stunning 42-inch diagonal screen, providing an optimal viewing experience for various settings, from intimate living rooms to dedicated home theaters. The display utilizes plasma technology, known for its ability to deliver deep blacks and vibrant colors, resulting in a rich and immersive viewing experience. With a native resolution of 1080p, the CW-42i ensures that visuals are sharp and detailed, whether you're watching movies, playing video games, or enjoying television shows.

One of the key features of the Runco CW-42i is its exceptional color accuracy and calibration capabilities. The display incorporates Runco's proprietary color processing technology, enabling it to reproduce colors with remarkable fidelity. Additionally, the CW-42i comes equipped with advanced calibration tools, allowing users to fine-tune their viewing experience to perfection. This level of customization ensures that every image looks as the creators intended, regardless of the content being viewed.

The CW-42i also distinguishes itself with its aesthetic appeal. With a modern and minimalistic design, it seamlessly integrates into any interior décor. The display features a slim profile and can be wall-mounted or placed on a stand, providing flexibility in installations. The bezels are narrow, offering a more immersive viewing area, ensuring that the attention remains on the screen rather than the frame.

In terms of connectivity, the Runco CW-42i is well-equipped to handle a variety of devices. It includes multiple HDMI ports, component inputs, and other essential connections, making it easy to link with Blu-ray players, gaming consoles, and set-top boxes. This versatility is crucial for users looking to build a comprehensive entertainment system.

Lastly, the CW-42i incorporates advanced sound technology, providing a comprehensive audio experience that complements the stunning visuals. Whether paired with an external audio system or used standalone, the display’s sound quality enhances the overall cinematic experience.

In summary, the Runco CW-42i is an exceptional display that combines cutting-edge technologies, versatile connectivity options, and a stylish design. Whether for home entertainment or professional presentations, the CW-42i is engineered to impress with stunning visuals and superior performance.
Top Page Image Contents