TI | |
|
|
| Jonas Holm |
TAS5613PHD2EVM
PCB SPECIFICATION
Version 1.00
BOARD IDENTIFICATION: | |
BOARD TYPE: | |
LAMINATE TYPE: | FR4 |
LAMINATE THICKNESS: | 1.6mm |
TOP LAYER COPPER THICKNESS: | 70μm (INCL. PLATING EXTERIOR LAYER) |
BOTTOM LAYER COPPER THICKNESS: | 70μm (INCL. PLATING EXTERIOR LAYER) |
COPPER PLATING OF HOLES: | >25μm |
MINIMUM HOLE DIAMETER | 0.3 mm |
SILKSCREEN COMPONENT SIDE: | WHITE - REMOVE SILKSCREEN FROM SOLDER AREA & |
SILKSCREEN SOLDER SIDE: | None |
SOLDER MASK COMPONENT SIDE: | GREEN |
SOLDER MASK SOLDER SIDE: | GREEN |
PROTECTIVE COATING: | SOLDER COATING AND CHEMICAL SILVER ON FREE COPPER |
ELECTRICAL TEST: | PCB MUST BE ELECTRICAL TESTED |
MANUFACTURED TO: | PERFAG 2E (www.perfag.dk) |
APERTURE TABLE: | PERFAG 10A (www.perfag.dk) |
BOARD SIZE: | 95 x 142 mm |
Aprox. Number of holes | 468 |
COMMENTS: | SEE DRILL INFORMATION FILE |
|
|
Page 1 of 1