EMC Standards Applied
Product Name:
Model Name: M195A
The following standards are applied only to the interface boards that are so labeled. (EMC is tested using the EPSON power supplies and TM series printers.)
Europe: | CE marking |
North America: | |
Oceania: | EMC:AS/NZS 3548, CISPR22 Class B |
WARNING
You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment.
CE Marking
The printer conforms to the following Directives and Norms:
Directive 89/336/EECEN 55022 Class B
EN 55024
IEC
IEC
IEC
IEC
IEC
IEC
The printers in which this board is installed do not conform to the following:
Directive 90/384/EEC | EN 45501 |
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
For Canadian Users
This Class A digital apparatus complies with Canadian
Cet appareil numérique de la classe A est conforme à la norme
RF Module
This equipment contains the following wireless module.
Manufacturer: TOYOTA INDUTRIES CORPORATION
Model Name: 6180210
Product Name: WIRELESS LAN
This device complies with Part 15 of the FCC Rules and
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
USA
This device conforms to Part 15 of the FCC rules.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
3