![](/images/new-backgrounds/1191504/19150423x1.webp)
Connecting the Projector
Connecting an audiovisual source (DTV decoder or DVD player) using the RCA input
1 Connect each RCA connector to the corresponding INPUT 1/COMPONENT terminals on the projector.
2Connect the other end of the cable to the corresponding terminals of a DVD player or DTV decoder.
3 To use the
Connect the other end to the audio output terminal on the audiovisual equipment.
• A 3.5 mm minijack to RCA audio cable adaptor may be necessary.
When connecting this projector to a DVD player or a DTV decoder, select “Component” by using RGB/COMPONENT on the remote control or the GUI menu. (See page 25.)
Setup & Connections
Projector
INPUT 1 | /COMPONENT | AUDIO INPUT | INPUT 2 | ||
| Y | CB | CR | (INPUT 1, 2) | RGB /COMPONENT |
Audio cable (sold separately)
To audio output terminals
RCA component cable (sold separately)
To analog component output terminals
DTV decoder
or
DVD player
Connecting an audiovisual source (DTV decoder or DVD player) using the 15 pin video and audio input
1 Connect the one end of the
2Connect the other end of the cable to the corresponding
terminals of a DVD player or DTV decoder.
3 To use the
Connect the other end to the audio output terminal on the audiovisual equipment.
•A 3.5 mm minijack to RCA audio cable adaptor may be necessary.
When connecting this projector to a DVD player or a DTV decoder, select “Component” by using RGB/COMPONENT on the remote control or the GUI menu. (See page 25.)
Projector
NENT
PR
AUDIO INPUT | INPUT 2 |
(INPUT 1, 2) | RGB /COMPONENT |
DTV decoder
To analog component output terminals
or
DVD player
Audio cable (sold separately)
To audio output terminals
12